Clearance ItemsShopping CartMy AccountOrder StatusContact UsHelpA Safer Life Starts Here(R)Toll Free: 877-358-0900
for Customer Service
Safe Home Products Inc
Shopping Cart:
Now in your cart Cart empty
Safe Home® Solutions:
Air Purifiers
Automatic Pill Dispensers
Child Safety
Easy House Cleaning
Emergency Preparedness
Home Healthcare
Home Protection
Pest Control
Pet Training
Relief Bands
 
Need advice on home safety? Ask our president.
Q: Help! My Mattress is Infested With Bedbugs!
Click for Answer
See more Questions
Contact Me
Focus on your home and safety. Take time to take the following safety quiz:

Q: What do you know about blood pressure and
its effect on your health? To know answer
click here..
Home  | Indoor (1530)  | Child Safety Products (438)  | Window Safety Products (157)  | Window Stops and Locks (6)

Window Warden Window Lock Bulk Kit, Polybag Pack

Item Code
CG-WW-B
Our Price
$4.01
Retail Price
$6.25
You save
$2.24 (36%)
Weight
0.1 Pounds
UPC Code
635035303002
Currently In Stock (12/16/2018)
Removable Window Lock Allows Safe Opening of Most Windows and Sliding Doors for Air

For security and child safety or safeguarding impaired adults, install Window Warden™ window locks from Cardinal Gates. Properly installed, each Window Warden™ window lock allows a maximum 4 inch opening. Use one unit per window: installs with 3 screws. Push button lock and unlock: No key. Note: Check with local housing codes before installation. Some codes do not allow installation of window locks on sleeping room windows. Meets ASTM F 2090-10 and IRC, Section R612.4. Patent Pending.

Included are mounting bracket, screws and lock. Mounting bracket is 2 7/8 inches long with two 1/2 inch key hole openings plus two openings for mounting 3 screws (included). Plastic Window Warden Unit 2 inches long, 7/8 inches wide and 5/16 inches thick. Unit mounts onto the bracket using two plastic tabs that fit onto the mount using "keyhole" openings on the bracket. Use the round stop button if the unit is mounting onto the window frame: not needed for mounting within window sliding track. Installation instructions included.

To lock the Window Warden, push in the side button lock pin or slide the stop button on the top of the unit. To release, move the mechanism on the top of the unit away from the window glass .

NOTE: The
Window Warden™ works on most double hung windows, single hung windows (only bottom pane moves up and down), sliding windows and sliding doors. Use one Window Warden™ per window. NOT intended for casement, awning, or hopper-type windows. On those windows, use metal window guards.

General Installation Instructions (See PDF for complete instructions and diagrams):
  • One unit per window: mount the left or right side of the window opening.
  • For most window installations , you may discard the Stop Button (C) and mount your WINDOW WARDEN™ Window Guard inside the window track to align with the lower window frame.
  • For other installations use the Stop Button (C) secured to the upper edge of the lower window frame with supplied screw (D) and mount your WINDOW WARDEN™ Window Guard on the window casement to align with the Stop Button.
  • Opening must be just under 4 inches to prohibit the free passage of a 4-in (102-mm) rigid sphere through the window opening for 2009 International Residential Code, Section R612 compliant. Always check your local building codes.
  • Remember: there is no substitute for adult supervision of children and impaired adults.
  • Single unit use will resist to 140 Lb of force

Click to verify BBB accreditation and to see a BBB report. PayPal verified to provide our shoppers with additional choices when they checkout their safety, security, home health and quality of life purchases from Safe Home Products.
Order from Safe Home ™ via our SECURE Shopping Cart
Copyright 1999-2018 Safe Home Products, Inc. All Rights Reserved