WaterCop Z-Wave Actuator Automatic Water Shut Off Controller (No Valve )
Install a Z-Wave Home Network (Purchase Separately) and the WaterCop Z-Wave Electric Ac tuator Motor as the base c ontrol unit for your WaterCop Z-Wave Emergency Water Shutoff system.
Combine with a WaterCop valve, 1/2. 3/4, 1 or 1.25 Inches (purchase separately) , moisture
sensors (purchase separately), and low temperature sensors (purc hase separately) for water leak and freezing pipe protection. Se nsors trigger actuator to shut off water valve, sound individual alarms at moi sture or freezing points and notify you via the Z-Wave home network.
Water Cop Motorized Z Wave Actuator Specifications:
Enclosure: Polycarbonate, NEMA 4x (weather resistant)
Voltage: 110V AC converted to 12V DC (Class 2 power converter with 20 foot cord), 1.3A full load.
Meets the approvals of state and municipal authorities
Three indicator lights:
Red=valve closes. Green=valve open so water flows. Yellow=On or flashing
means an error or the valve is not programmed into a Z-Wave network.
Three panel-mount tactile switches to manually activate/program the valve.
Open/close buttons allow manual valve control
Compatible with multiple add-on Water Alarm Sensors
Warranty: 2 Years from Dynaquip, the Manufacturer
Note: Safe Home does not offer technical support for this product. Please contact the manufacturer
How It Works
The motor contains a wireless Z-Wave radio transceiver which receives water leak signals from moisture sensors and then signals the system’s valve to automatically turn off your water supply. Valve and moisture sensors sold separately.
Where to Use WaterCop Water Sensors:
Kitchen: dishwashers, refrigerators, icemakers
Bathroom: toilets, bathtubs, showers
WaterCop Systems are activated by flood sensors, an optional remote switch or many types of home security systems.