WaterCop Z-Wave Actuator Automatic Water Shut Off Controller with 1.25 In. Valve
Install a Z-Wave Home Network (Purchase Separately) and the WaterCop Z-Wave Electric Ac tuator Motor as the base c ontrol unit for your WaterCop Z-Wave Emergency Water Shutoff system. Note: This is a controller with a WaterCop valve, 1.25 Inches. Add moisture
sensors (purchase separately), and low temperature sensors (purc hase separately) for water leak and freezing pipe protection. Se nsors trigger the actuator motor to shut off water valve, sound individual alarms at the moi sture or freezing points and notify you via the Z-Wave home network. WaterCop Z-Wave Water Shut Off System Features:
Protects 24 hours a day
Open/close buttons allow manual valve control
Three color-coded lights indicate closed valve, open valve, or error
Compatible with multiple add-on Water Alarm Sensors
How It Works
The motor contains a wireless Z-Wave radio transceiver which receives water leak signals from moisture sensors and then signals the system’s valve to automatically turn off your water supply. Valve and moisture sensors sold separately.
Where to Use WaterCop Water Sensors:
Kitchen: dishwashers, refrigerators, icemakers
Bathroom: toilets, bathtubs, showers
WaterCop Systems are activated by flood sensors, an optional remote switch or many types of home security systems.
WaterCop Z-Wave Product Specifications:
WaterCop Z-Wave with 1.25" motorized ball valve that automatically turns off the main water supply when unwanted water is detected due to a leak or overflow.
Multiple WaterCop Z-Wave valves can be used and/or programmed into a Z-Wave Home Automation System.
Brass valve with commercial grade seats and seals. Ball valve: full port brass forged body; NSF61 and NSF61-G (Lead Free) available. Seats: RTFE Seals: Viton
General Usage Specifications: Maximum Working Pressure: 125 PSIG, Ambient Temperature: 35° to 105°F.
Enclosure: Polycarbonate, NEMA 4x (weather resistant)
Voltage: 110V AC converted to 12V DC (Class 2 power converter with 20 foot cord), 1.3A full load.
Meets the approvals of state and municipal authorities
Three indicator lights: If the red light is on, it means that the valve is closed. The green light means that the valve is open, allowing water to flow freely through the plumbing system. If the yellow light is on or flashing, it means an error or the valve is not programmed into a Z-Wave network.
Three panel-mount tactile switches to manually activate/program the valve.
Warranty: 2 Years from Dynaquip, the Manufacturer
Note: Safe Home does not offer technical support for this product. Please contact the manufacturer.