Clearance ItemsShopping CartMy AccountOrder StatusContact UsHelpA Safer Life Starts Here(R)Toll Free: 877-358-0900
for Customer Service
Safe Home Products Inc
Shopping Cart:
Now in your cart Cart empty
Safe Home® Solutions:
Air Purifiers
Automatic Pill Dispensers
Child Safety
Easy House Cleaning
Emergency Preparedness
Home Healthcare
Home Protection
Pest Control
Pet Training
Relief Bands
Need advice on home safety? Ask our president.
Q: Using Original TV Ears Wireless TV Headset with Hearing Aids
Click for Answer
See more Questions
Contact Me
Focus on your home and safety. Take time to take the following safety quiz:

For people suffering from asthmatic symptoms:
Q: How much do you know about the
dangers of odors in confined spaces?
To know answer
click here..
Home  | Indoor (1127)  | Business and Home Safety (329)  | Water Management Devices (67)  | Appliance Water Shut-Off Systems (17)

WaterCop LeakStop Plus,Two Sensors,Alarm Interface 1 Inch

Item Code
Our Price
Retail Price
You save
5.2 Pounds
UPC Code
Ships Within 5 Business Days (8/22/2019)
LeakStop Plus 1 In. Single Point Detection, Auto Shut-Off Plus Secure Interface

For single water appliances like water heaters, protect with single appliance LeakStop PLUS WaterCop system with 1 inch lead free valve. Alerts to water leaks and shuts off water valve automatically when either or both of the two moisture sensor probes get wet.  Includes security output. Install water valve, install controller and place two moisture sensor probes where water is likely to accumulate under or near the appliance.

Use conduit at the bottom to hard wire to third party devices. Be notified via a light, buzzer, auto dialer device or security/automation system. Maintenance persons or home owners then receive immediate notification about the closed valve. Please note this unit cannot use additional WaterCop sensors.

WaterCop LeakStop Plus One inch Valve System:

  • Plumbing supply line installation use.
  • Can monitor only if installed upstream of appliance or area to monitor.
  • Placement of two sensor probes must be where water is most likely to accumulate if a leak occurs.
  • Ideal for water heaters. Nearly 8-million homeowners replace failing water heaters each year. Many fail within a few years of installation.
LeakStop PLUS Specifications:
  • Max working pressure – 125PSIG
  • Ambient temperature – 35° to 105° F.
  • Voltage – 12VDC 1 phase (includes 115V wall transformer, 20 foot cord)
  • Valve – Full port brass NSF61G ‘Lead Free’
  • 1” NPT – 52 GPM (Gallons Per Minute) Unrestricted flow rate.
  • Sensor wires are each 10 ft. long
  • Requires 110VAC power: power cord is 20 ft long.
The WaterCop LeakStop 1 inch Valve System:
  • Constantly monitors for accumulating moisture
  • Valve remains closed until it has been manually reset
  • 1.0 inch low lead brass valve.
  • Manually open/close the valve with soft touch buttons on the actuator
  • Made in USA

Click to verify BBB accreditation and to see a BBB report. PayPal verified to provide our shoppers with additional choices when they checkout their safety, security, home health and quality of life purchases from Safe Home Products.
Order from Safe Home ™ via our SECURE Shopping Cart
Copyright 1999-2019 Safe Home Products, Inc. All Rights Reserved