Brass Ball Valve With Actuator Platform Meets CA and VT Low Lead Standards
One Inch MADE IN USA full port brass water valve meets California and Vermont standards for ultra low lead law. Made by Dynaquip Controls. Install this lead free water valve with lever handle and later add the WaterCop actuator (not included) and Water Cop moisture sensors or freeze sensors. Protect your home from frozen pipes and water leaks from appliances. Protection means installing the water sensors under water appliances you want to protect.
The Water Cop actuator screws onto the water valve platform. The water shut off valve has a handle to turn on and off the water until you add the electric water valve shut off actuator. This is a full port 1 inch water valve: no reduction occurs in the water flow. NPT National Pipe Tapered)female thread. UL tested. 600 psi. This heavy duty industrial valve is also widely used for LP gas, natural gas, and fire protection system applications.
NSF61G approved for lead free usage. **Lead Free NSF61G refers to the wetted surface of pipe, fittings and fixtures in potable water systems that have a weighted average lead content = 0.25% Source: California Health & Safety Code (116875); Vermont Act 193. California Assembly Bill 1953 and Vermont Act 193 reduced the amount of lead in specific plumbing fixtures from its current amount of no more than 8% to a new standard not to exceed 0.25%. All fifty states must comply with this NEW 0.25% requirement by January 4, 2014.