Use these white sliding door outlet covers for child safety when you need to protect oblong outlets without the GFI. Reduce risks of electrical shocks or burns to children. An energy saving insulating gasket around the perimeter of the outlet cover seals against air leakages into and
out of your home. Each outlet cover measures 2.75 inches by 4.5 inches. Twin Sliding Door Child Safety Outlet Cover Features:
Child Restraint Design: Spring-loaded sliding doors automatically keep
receptacle holes covered when not in use. This gives the cover a solid
appearance, concealing the black receptacle holes which are so inviting to
Remodeling Function and Economy: Remodeling? Cover with white, off white, ivory or
brown sliding panel outlet covers. This child safety outlet care cover conceals
Energy Efficiency: An
insulating gasket around the entire cover seals against air leakages into and
out of your home.
The Minneapolis Blower door test is used in the
industry to measure energy loss. The blower test was conducted on a house with
standard electrical outlet covers. Each electrical outlet in that house was
covered with an automatic sliding door outlet cover. The test was repeated. Air
infiltration was reduced 15%.
Simple Installation: Use a screw driver to install in less than a minute.
NOTE: Only for 120VAC outlets. Three models for 2 prong, 3 prong or 3 prong 2 screw electrical receptacles
This babyproofing safety outlet cover plate mounts with 2 longer provided screws (1 screw on top; 1 screw on bottom).
of electrical receptacle.
Note: Fits only 3 prong duplex electrical outlets with two 3 prong grounded receptacles in a solid
Not for use on GFI (Ground Fault Interrupter) Outlets with test and reset
Note: Inspect electrical outlets for age deterioration or for repeated use damage , especially in kitchens and baths.
Loosely fitting plugs, especially 2 prong ungrounded ones, may partially or completely slip from the receptacle
when cords are slightly moved. These damaged receptacles are fire hazards.