This box of 12 white outlets covers install quickly with provided longer screws and fit only outlets with 2 screws. Baby proof electrical outlets while saving on energy costs and drafts. To open, catch part of a plug in the far side of the outlet and slide open. An energy saving insulating gasket around the perimeter of the outlet cover seals against air leakages into and out of your home. These are two screw covers made only for outlets with rectangular design. Made in USA.
Child Restraint Design: Spring-loaded sliding doors automatically keep receptacle holes covered when not in use. This gives the cover a solid appearance, concealing the black receptacle holes which are so inviting to toddlers.
Remodeling Function and Economy: Remodeling? Cover with white, off white, ivory or brown sliding panel outlet covers. This child safety outlet care cover conceals wall outlets.
Energy Efficiency: An insulating gasket around the entire cover seals against air leakages into and out of your home. The Minneapolis Blower door test is used in the industry to measure energy loss. The blower test was conducted on a house with standard electrical outlet covers. Each electrical outlet in that house was covered with an automatic sliding door outlet cover. The test was repeated. Air infiltration was reduced 15%.
Simple Installation: Use a screw driver to install in less than a minute.
NOTE: Only for 120VAC outlets. Three models for 2 prong, 3 prong or 3 prong electrical receptacles
This babyproofing safety outlet cover plate mounts with 2 longer provided screws (1 screw on top; 1 screw on bottom). of electrical recepacl e.
Note: Fits only 3 prong duplex electrical outlets with two 3 prong grounded receptacles in a solid oblong receptacle.
Not for use on GFI (Ground Fault Interrupter) Outlets with test and reset buttons.
Note: Inspect electrical outlets for age deterioration or for repeated use damage , especially in kitchens and baths. Loosely fitting plugs, especially 2 prong ungrounded ones, may partially or completely slip from the receptacle when cords are slightly moved. These damaged receptacles are fire hazards.