Wall mount FGD-0022 mechanical temperature sensor with alarm for Sensaphone monitor system units: detect if air temperature is too high or too low. Alarm limits adjust from -30° to 130° F. Works with all Sensaphone products. Wire not included. Cannot be used to monitor temperature readings
remotely: clearly display temperature readings on site. Trigger local alarms when dangerous temperatures are sensed.
Select an acceptable temperature range by setting the adjustable high
and low limit arms on the front of the device with a screwdriver. Install
units away from windows, doors, or heat sources that could cause an
inaccurate reading of air temperature. To protect a building against
freeze damage, always install at least one device on every floor or
the building already has an energy management system, an easy rule of
thumb to follow is to install a unit near each thermostat.
the TEMP ALERT’s front mounted terminals to the Sensaphone system using
22-18 AWG twisted pair cable. You can add additional units to one
Sensaphone zone by wiring them together.
Sensaphone Temperature Alert FGD-0022 Features:
Used on a dry contact input to detect high and low temperature limits. The TEMP ALERT uses normally open (N.O.) dry contacts rated at 50mA at 12VDC.
Causes dial-out when temperature reaches high or low limit.
Dimensions: 6.25” x 3.25” x 2”
Temperature Range: -30° to 130°F (-34° to 54°C)
Weight: 6 ounces
Accuracy: ± 3°F
Housing: ABS Plastic
Compatibility: All Sensaphone models
Package Contents: (x1) Temperature alert(x2) Plastic drywall anchors(x2) #6 Metal tapping screws