Sensaphone additional 10' water detection rope IMS-4831 connects to your existing IMS-4000 Host or Node via an RJ-45 jack. Because the sensor utilizes your existing Category-5 structured wiring system, no special wiring or schematics are needed to install them. Simply locate where you want to place the sensor, attach a standard patch cable, plug it into your patch panel and do the same in your server room to connect your sensor to the IMS-4000. Note: FGD sensors, accessories, etc. are not compatible with IMS-4000 systems by Sensaphone.
It’s no different than wiring up a workstation or a printer.Once connected, the IMS-4000 will automatically recognize the type of sensor installed and configure it for you, using a standard template that you can modify. Because the IMS-4000 supplies power and configuration data for each sensor, the IMS-4000 can detect faults with your sensors & if there’s a cable disruption or your sensor is accidentally unplugged, you’ll know it.