White Safe-T-Alert 65-541 surface mount 12 volt carbon monoxide detector alarm is an approved rv part for your trailer , motor home, boator RV. Replaces CCI Model 3400.0. and 60-541. Made in the USA, this CO detector is approved for use in RV's, motor homes, campers, trucks, cars, buses, etc. with 12 Volt systems.
Fully operational when CO alarm is muted. Memory scan retains CO level that activated the alarm: saves the CO level after ventilation. Micro Current Technology saves battery power.
Two level carbon monoxide alert: Caution Alarm (60 ppm) and Hazard Alarm (at or above 100 ppm). Maintenance free sensor. Loud 85 dB Alarm.Test/Reset Button: Used to temporarily silence alarm during ventilation. Tests all detector functions and activates Memory Scan. Hard wires to 12V power.UL Listed to UL 2034-2005 for Recreational Vehicles and
Unconditioned Areas, including March 8, 2007 revisions. Meets RV
standard ANSI A119.2 as required by the RVIA .UL tested for vibration, cooking fumes, shock, humidity, salt water spray, corrosion and temperature extremes.
Warranty: The Date Stamped on each Detector is the Date of Manufacture. Each unit
has a 10 year shelf life. The Limited Warranty is 1 year and begins from
the date of resale. Units have a 5 year life after powered up first time. Replace units after 5
years. Contact MTI directly for warranty related questions. The
65- designation is for this newer unit per new regulations. Contact MTI directly for warranty related
questions. Replace if sensor or unit is faulty. Mark installation date on unit: replace no more than 5 years from that date. Warning lights prior to shut-down.Made in USA (Illinois)
RV Operating Specifications
UL tested for vibration, cooking fumes, shock, humidity, salt water spray, corrosion and temperature extremes.
Alarm Point: 400 PPM 4-15 Minutes
Operational Range: 12 Volts +/-15%
Power Supply and Current Draw: 108 mA @ 12 VDC
Low voltage power warning
Operating Temperature: -40° F to +158° F
Case Size: 5.5'W x 3'H x 1.3'D
Case Dimensions: Surface Mount 60-541 5.5"W x 3"H x 1.3"D: Attaches to Wall with Screws.
Screw Holes: Centered, approx. 5 1/4" apart.
Model 65-541 Surface Case - 5.5"W x 3"H x 1.3"D. Model 65-542 Flush Case - 6.5"W x 3.5"H x 1.25"D.