Roadworthy 24 Volt BackSeat Heater f or Large Construction Vehicles Provides over 2100 BTU's
Roadworthy 24 Volt BackSeat Heater: instant warmth for cold areas in almost any 24 Volt large construction or similar vehicle: over 2100 BTU's of heat. Hard-wires. Powered by vehicle's battery: installs easily. Back Seat Heat 4000 mounts in different locations or vehicles. Outer housing stays cool during use. Ignition block allows truckheater operation only when engine is running. Unique cell design: 100% efficient heat transfer to room air. Not for use in airplanes.
RoadWorthy Back Seat Heat Model 4000 (24 Volt DC Only) draws 25 amp @24 V DC with power consumption of 600 watts to deliver 2100 BTU's.High temperature cut-out recycling limit switch. Controls: off, fan only, heat. Adjustable thermostat.Fan rating: 102 CFM. Universal mounting bracket. Wire harness length: 20 ft. Auxiliary control: optional dashboard on/off switch. Assembled in USA. Dimensions: 5.25 in x 7.25 in x 8.25 in. Weight: approx. 6 lbs. Warranty: 2 years from Family Safety Products. Patent #4,9000,898 and 323,553
Not intended as primary heat source. Air output is 20° to 30° warmer than air input. Alternator must produce 45 to 40 amps for enough power to operate heater.
Mount low, along floor, under elevated seats, on wheel wells, or on the floor.
Start vehicle before turning on heater. Operate heater and fan ONLY if engine is running.Installation required. Included: wire, optional dash mounted switch and universal mounting bracket.