Box of 48 Plug Guard safety outlet covers. Save energy. Add child safety. to your home, clinic or business. Plug Guard fits any standard 3 prong grounded duplex electrical outlet: its two sliding cover plates are spring-loaded and move up or down. Recessed outlet openings let you pull up a door or push one down to insert an electrical plug. Remove the electric plug: the outlet door automatically slides shut. Twin outlet cover replaces existing outlet plate: foam backing switch gasket means the Plug Guard seals tightly around the outlet to prevent drafts that increase air conditioning or heating bills. Package of 48 outlet covers.
3 inches wide by x 4.75 inches high x 5/8 inch thick.
Two sliding doors, bottom moves down and top moves up. Each door is 1.75 inches wide and 2 inches high
Door opens only wide enough to expose the actual outlet: about 1 inch.
This is for a box of 48 outlet covers.
Use for all standard 2 and 3 prong plugs. Over-sized plugs will not fit into either opening.
Slightly thicker than a standard plate cover.
Warranty: Free from defects in material and workmanship for one year by manufacturer.
Made in China
Plug Guard Installation Instructions:
Shut off Circuit Breaker at Fuse Box
Use a screw driver to remove existing wall plate by turning screw counter-clockwise.
Position Plug Guard in place and turn screw clock-wise to secure without over tightening.
Turn power back on and use as needed.
The sliding door outlet cover is about the same size as a standard outlet cover but it is thicker. When you slide a door open, there is an opening that is about 1 inch high and wide enough for all standard 2- and 3-prong plugs. O ver-sized plugs will not fit into either opening.