Parent Unit's Black Anti-Tip Furniture Anchoring System uses buckles secured with high bonding adhesive tape or double screws to fasten equipment and furniture to walls to improve home safety. Anchor bookcase or furniture for child proofing or for earthquake preparedness.
"Anti-Tip" greatly reduces dangers associated with unsecured equipment and furniture. Use on televisions, dvd players, microwave ovens, stereos, computers and more. Also on dressers, entertainment centers, wall units, tv stands, kitchen carts and other furniture that can be tipped or toppled. TV or Appliance Anti-Tip Anchoring System Features:
Helps keep electronic equipment and furniture safe and secure.
Secures equipment and televisions to furniture or walls.
Set includes: 1 buckle with 18" strap, 2 sturdy plastic pieces, each 2 inches square with two screw holes that go through a raised area when you can insert the heavy braided 1 inch wide strap. The anti-tip plates includes high bonding tape plus the option of the 4 included screws for extra strength.
Installation Instructions are below
Suggestion: Install when children are not present, i.e. asleep for the night.
Product Performance Warranty : This product does NOT replace child supervision. This product is only intended to help or reduce movement of equipment during jarring movement. It is common understanding that fastened equipment should fare better during jarring movement than equipment that is not fastened, helping to reduce the amount of damage and injury that could result. No warranty can be properly applied to the performance of the products due to the uncertainty of forces generated, and numerous variables involved in a jarring event, or natural disaster. Products that are defective in material and workmanship prior to installation of the product will be replaced. The user or third party installer accepts liability for injury, loss, or damage, direct or consequential, arising from use or misuse or inability to use the product.
Made in USA
Three Installations Options: Use Tape even when using screws as the tape serves as a washer to provide additional holding strength.
Equipment to Surfaces: Use the tape only. Use only when the surface is non-porous and heavy enough not to be tipped over. Ex. a laminated counter top.
Equipment to Wall Stud or Furniture: Use Tape only on the Equipment (ex. computer screen) and use tape and screws on the furniture loop.
Furniture to Wall Studs: Use Tape and Screws on Each Loop
Set-Up Instructions:
Determine installation option appropriate for your use
Plan positions for loop installation. Align loops so strap can pass through each loop and be joined at the buckle.
Read instructions regarding use of adhesive. Affix the loops. Peel off tape, locate loop and apply distributed pressure for 45 seconds minimum. Install screws if application. Bond overnight or 12 hours minimum before attaching straps and testing.
Feed strap through both loops
Feed strap through buckle. Depress buckle and feed strap through the bottom of the buckles as in instruction diagram
Tighten straps and test by tugging.
Bond overnight or 12 hours minimum before testing loops. 72 hours allows maximum bonding.
Periodically check to insure installation integrity.