Reduce Water Heater Damage with Flood StopFS 1.25-NPT Water Alarm /Valve
On-Site Pro Flood Stop for 1.25 inch diameter pipe. Includes 1 Floodstop moisture sensor, solid brass full port motorized low lead water valve, controller. Output Contacts for Security Systems, Home Automation or Auto-dialer System . Add multiple sensors beneath or near protected pipe if desired.
87 dB water alarm sounds as automatic water shut off valve closes when sensor is activated by moisture or water. Water damage reduced: water supply is shut off. Easy to install on water heaters, water softeners or any appliance with a 1.25 inch pipe.
Installs in about 15 minutes. B all valve meets January 1, 2014 drinking water
requirements for lead free water valves. Water sensitivity control with 4-pin connection to valve/sensor connector. AC adapter/transformer or batteries (4 AA batteries, not included). Batteries serve as battery backup when AC is interrupted. Partial vacuum occurs in the tank when water is turned off reducing the water leak amount. Alarm beeps: has mute button. Water Sensor: 1.5" X 7.5", double sided. Additional sensors may be added in series. AC Adapter Cord Length: 6 Ft. Wire Length from the Controller to the Valve: About 30 Inches Long. FloodStop Controller: 3 buttons: Mute, Close Valve and Open Valve. One year limited manufacturer warranty.
UL Listed Class 2 Wall Adapter, 115AC/9VDC. UPC listed, full port, motorized ball valve: CNC machined.
Motor operates at 6VDC.Rated 0-180 PSI. Max 250 PSI. Solid brass.
Signal outputs: 2 normally closed. Alarm: beeping with mute button.
To install, connect valve to the cold water line to the water heater. Mount the control unit. Place sensor(s) on floor. Plug power supply into an un-switched outlet. Note: electricity is used only when the sensor detects water.
NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. Insulate against floor dampness or metal pan using paper towel or cloth.