Many newer homes have
interconnected smoke alarms, but may not have an alarm in every room as
recommended by the National Fire Protection Association. The Kidde Wireless AC
Powered Smoke Alarm makes it easy to expand the coverage of a home's current
interconnected system. By replacing just one current interconnected alarm with a
Kidde Wireless AC Powered Smoke Alarm, a homeowner can quickly and easily
install other Kidde Wireless products in rooms that need fire protection. The
Kidde Wireless AC Powered Smoke Alarm bridges the home's current system to the
newly installed wireless products so that when one alarm sounds, they all sound,
providing more warning in more places, and giving a family more time to escape a
End of Life Warning – Alerts consumer that
it is time to replace the unit ten years after initial power.
Twist-off Mounting – Provides quick
installation and easy battery replacement.
Green LED – Flashes to indicate which alarm
initiates the response, as well as when system is temporarily silenced due to
a nuisance alarm or low battery warning.
Smart Touch Button – One touch quickly and
temporarily silences nuisance alarms activated by any alarm in the system;
will hush a low battery chirp for up to 12 hours; will test the operation of
the alarm and interconnected system.
85 Decibel Alarm – Alerts residents to
deadly smoke and fire. Loud enough to wake most sleeping adults when placed in
bedrooms and outside of sleeping areas.
Tamper Resistant – Tabs help deter tampering
or theft of unit or battery.
Unique ID Code – Dipswitch pattern inhibits
interference from similar systems nearby.
AC Power with Battery Backup – Enables
homeowners to expand a current interconnected system. Also can be used in
homes with existing hardwired only smoke alarms to create an interconnected
system. 9v battery (included) protects during short-term power outages.
Low Battery Warning – Chirps once a minute
and red LED flashes to indicate batteries need replacing.
Wireless Technology – Uses radio
frequency to both transmit and receive messages about a hazard in the home;
when one alarm sounds, all will sound.
Red LED – Flashes in conjunction with alarm
beep, i.e. during an alarm response, to indicate low battery, or to indicate a
Easy to install – Simply mounts to ceiling
or wall. No wiring needed.