John Sterling 5-Bar White Lift Out MAX Window Guards in Box of Two Units
Each John Sterling Model 1175 child safety window guard has 5 bars. windowguard is 21 Inches tall; extends from 24 inches to 42 inches to fit a horizontal or vertical space. This is a case of two 1175 window guards. Heavy angular flat bar design resists bolt cutters. Dual locking brackets: one at the top, one at the bottom. Fire safety release pin option is available. Child safety window guard plus home safety security guard for both sleeping and non sleeping areas .
These Heavy Duty John Sterling Security Guards Swing Open and Lift Out of Mounting
Brackets. Install Horizontally or Vertically to Protect Double Hung
Windows, Sliders or Casement Windows. Maximum 3.5 Inches Between
Security Window Bars. Protection for Children and Belongings in Homes, Day Care Centers and Apartment Buildings.
Check local city codes prior to help you select the proper
type of window guards to protect your children.
Sterling Security and Child Safety Window Guard 117 5 Sterling
Max Guard for Maximum Window Security. This Lift Off Escape Type
Window Guard Features:
Use to Protect Most Windows: Double hung, sliders or casement windows.
Locations: Sleeping and non-sleeping rooms.
Spacing: 3.5 inches. Exceeds 4 inch recommended safety standard for
child window bars.
Bar Options: 5 bar
Flat Bar Design : Resists bolt cutters.
Options: Horizontal or vertical installations.
Stackable: Fit units side by side or vertical stack to fit window width or
Color: Off White.
Quantity: Box of 2 Guards
Construction: Solid steel window guards
Test : Tested to withstand 150 lb. force at maximum extended width.
Type: Lift off emergency exit window guards.
Hinge Brackets : Allow security guard to lift off when open. Mounting
screws are protected when window guard is closed.
4 Mounting Brackets Per Guard: Engage locking brackets simultaneously at top and bottom
of guard. Unique anti-lift brackets can be mounted at top or bottom
to hold window guard securely to both brackets with only one fire
safety pin or padlock. Release guard by lifting slightly before
Guard Per Guard: Protects against bolt cutter.
One Anti-Lift Latch Per Guard
Safety Release Pin: Option instead of padlock for security. Mounts
high on side of window guard out of reach of small children.
Requires moderate force to remove.
Limited Warranty: Replacement of any part found defective in
material or workmanship. Warranty is limited strictly to replacement
of the defective part and does not cover any other expenses which
may arise in the use or replacement of such part.
Options: Recessed or Surface Mount. Surface Mount burglar bar
installation is easier as screws are easier to drive and less
accessible to intruders on the outside.
Resistant: Option to drill out the Phillips cross slots in each
screw to make tamper resistant.
Options: Double hung, Sliders or Casement Windows only. Mount
security bars over both upper and lower window sashes or over lower
sash only as desired.
Child and Window Security Guards when properly installed will tend to discourage illegal intruders.
But no protection is absolute. With enough time and tools a
determined criminal can defeat any barrier.
only in solid, non-rotting window tracks. Expand Guard to fit
tightly into outside window track.
support Guard in level position NO MORE THAN 4 inches from sill to upper half of bottom bar .
Mark location of holes on each side. Remove Guard and drill
5/32" diameter. pilot holes 1 inch deep.
Guard and mount with #10 one way screws (included.)
the inner window NO MORE THAN 4 inches above the lower half of the
top bar. Position "L" shaped stops so as to limit
the opening above the Window Guard to a maximum of 4 inches.