JS 1123-SBD 3-Bar Black Fixed Window Guards, Expansion 14-24 Inches, Case of Six
Case of six JS-1123-SBD 3-Bar non-opening John Sterlingwindow guards for narrower double hung windows per the New York City requirements for non-sleeping areas. John Sterling 1123-S window guards in black powder-coated steel. Each window guard is 15 inches high by 14-24 inches wide. John Sterling 1120 Series Fixed
Guards are New York City Approved #HDWG 05-87-86 and HDWG-04-93-09
for Installation in Double Hung Style Windows Only. Spacing
between bars: 4.5 inches. Diameter
of Bars: 5/16 th Inch. Area Bars Protect: 15 to 19 inch opening. Tested to withstand 150 lb. force at maximum extended width. Made in USA.
Options: Recessed or Surface Mount. Surface Mount burglar bar
installation is easier as screws are easier to drive and less
accessible to intruders on the outside. Tamper
Resistant: Option to drill out the Phillips cross slots in each
screw to make tamper resistant . Installation
Options: Double Hung windows only. Mount security bars over both
upper and lower window sashes or over lower sash only as desired.
Limited Warranty: Replacement of any part found defective in
material or workmanship. Warranty is limited strictly to replacement
of the defective part and does not cover any other expenses which
may arise in the use or replacement of such part.
for Series 1120 Series Sterling Window Guards:
of this product on a fire escape window in New York is illegal, could
be a serious safety hazard and could result in a fine by the
Department of Buildings. Some communities require a quick means
of easy escape from window guards in some applications. Check
your local codes.
For sleeping area window guard installations in New York City, check
with your local borough for code requirements.
only in solid, non-rotting window tracks. Expand Guard to fit
tightly into outside window track.
support Guard in level position NO MORE THAN 4-1/2 inches from sill
to upper half of bottom
bar . Mark location
of holes on each side. Remove Guard and drill 5/32"
diameter. pilot holes 1" deep.
Guard and mount with #10 one way screws (included.)
the inner window NO MORE THAN 4-1/2" above the lower half of
the top bar. Position "L" shaped stops so as to
limit the opening above the Window Guard to a maximum of 4-1/2.