Stainless Steel Window Guard Expands 17 to 23 Inches and Removes from Mounts to Escape
Guardian Angel Window Guard GA1723-44-SS is a stainless steel removable window guard MADE IN USA. Expanding window guard forchild safetyhas 4 bars: expansion is 17 to 23 inches vertically or horizontally. When mounted properly, 21 3/8 inches of protection is provided with this 4 bar guard. 4 quick release lock buttons, two on each side of
window bars. Snap Guardian Angel Window Guard into Mounting Bars. . Side posts anchor with 2" sheet metal screws into solid
stud or frame mats. Use stainless steel in ocean front or lake front
installations. Or where humidity and rainfall are high. Note: Picture representative of window guard configuration.
In an emergency, an adult or older child pushes button locks near the mounting bars to remove guards. Window guards remove easily from inside or outside a window.
Guardian Angel II window guards are made from stainless steel tubing. For optimum baby and child safety, install window guards on any window more than 12 feet above ground level, windows 2nd through 6th story, or at any level where a child could fall or climb through an open window. Window screens are not strong enough to keep children safe from window falls.
Conforms to American Society for Testing and Material standards (ASTM F2090-01A) and recognized by the U.S. Consumer Products and Safety Commission. Conforms to most local fire and building codes for egress type window guards. Meets Massachusetts building codes: 780CMR 3603.14.2.2 and 780 CMR 1010.4. Made in USA. Lifetime guarantee by manufacturer.For large quantity orders, allow three weeks for delivery. Express shipping available depending upon inventory.
How to measure for child safety window guards:
Identify window type. VERTICAL: The window opens by sliding a panel to the side in a track, cranking a panel out or pulling or pushing a panel of glass in or out. Guards for vertical windows are mounted like prison bars to protect either the entire window opening or the entire window. SINGLE HUNG : The lower window panel moves up and down in a track. DOUBLE HUNG : Both the upper and the lower window panels move up and down, each in its own track. For Single or Double hung windows, customers usually protect only the window opening. This is done with a single guard with a window stop to keep the window from opening above the top of the mounting bar. To protect both panes, vertical guards can be mounted side by side or stacked like a ladder.
Decide where to mount window guards: Inside the window frame or extending beyond the frame with mounting bars in the studs.
Use a tape measure to measure interior width of the window frame or beyond the frame for stud mounting.
Push the bottom window panel up until it stops or push the panel to the side to measure the entire physical opening .
Treat a double or single hung window like a vertical if you wish to cover the entire window. Send us e-mail with the dimensions and we'll assist you.
Compare measurements with chart below. Guards "telescope" like curtain rods, locking into the side or top mounting bars. Guardian Angel II window guards are not spring-loaded.
For unusual windows or for larger quantities of guards, fax specs or drawings to SafeHomeProducts.com.
NOTES: Window guards do NOT substitute for adequate supervision. Child safety requires mature persons establishing and supervising children in a safe environment.
Window guards MUST protect the entire OPEN portion of window or panel for baby safety.
No space greater than 4 inches is allowed according to ASTM PS 120. (This is why double and single hung windows can not be safely mounting vertically in sliders, casements, and push-outs or pull-in windows.)
Use window stops in conjunction with Window Guards for windows that open more than 22 inches.