Guardian Angel Window Guards Help Keep Children from Falling Out of Windows
Childproofing windows includes window guards . Window screens cannot prevent falls from windows . Guardian Angelvertical or horizontal mount window guards like the Guardian Angel 3558-43 provide child safety. Install on slider windows, up and down and wind out casement windows. 3558-43 extends 35 to 58 inches. Bars are 13 inches high: protect an opening 13 inches to 17.25 inches wide or high. Combine units for wider openings . When butted together, the gap between units is 4 inches. 2 inch space between lowest bar and mount. Same at the top.
Made from strong, steel tubing powder coated with a durable, lead-free white paint. Install window guards on any window more than 12 feet above ground level, windows 2nd through 6th story, or at any level where a child could fall or climb through an open window. Window screens are not strong enough to keep children safe from window falls.
Tested to withstand up to 150 pounds of pressure in locked position.
Quick release buttons for fast window guard removal in emergencies. Guards have 2 or 4 emergency release buttons.
No tools or excessive force are needed to remove Guardian Angel window guards.
Remove window guards from inside or outside the window.
Bar spacing of 3 7/8" : exceeds 4" to 5" safety standards.
Side posts anchor with 2" sheet metal screws into solid stud or frame mats..
Six stock sizes with 4 bars fit most horizontal opening (single and double hung) windows.
Combinations of 3, 4 or 5 bar vertical mount units protect openings of vertical windows like sliders and casements.
Conforms to American Society for Testing and Material standards (ASTM F2090-01A) and recognized by the U.S. Consumer Products and Safety Commission.
Conforms to most local fire and building codes for egress type window guards.
Meets Massachusetts building codes: 780CMR 3603.14.2.2 and 780 CMR 1010.4.
Made in USA.
Lifetime guarantee by manufacturer.
For large quantity orders, allow three weeks for delivery. Express shipping available depending upon inventory.
How to measure for child safety window guards:
Identify window type. VERTICAL: The window opens by sliding a panel to the side in a track, cranking a panel out or pulling or pushing a panel of glass in or out. Guards for vertical windows are mounted like prison bars to protect either the entire window opening or the entire window. SINGLE HUNG : The lower window panel moves up and down in a track. DOUBLE HUNG : Both the upper and the lower window panels move up and down, each in its own track. For Single or Double hung windows, customers usually protect only the window opening. This is done with a single guard with a window stop to keep the window from opening above the top of the mounting bar. To protect both panes, vertical guards can be mounted side by side or stacked like a ladder.
Decide where to mount window guards: Inside the window frame or extending beyond the frame with mounting bars in the studs.
Use a tape measure to measure interior width of the window frame or beyond the frame for stud mounting.
Push the bottom window panel up until it stops or push the panel to the side to measure the entire physical opening .
Treat a double or single hung window like a vertical if you wish to cover the entire window. Send us e-mail with the dimensions and we'll assist you.
Compare measurements with chart below. Guards "telescope" like curtain rods, locking into the side or top mounting bars. Guardian Angel II window guards are not spring-loaded.
Remember: horizontal and vertical window guards differ . Mounts for vertical guards are designed to butt together so that only 4 inches are between protective bars. The mounts are at the top and bottom of the window interior, often between the screen and the window glass. Mounts for horizontal guards are mounted on the sides of the window's bottom pane: there is a 4 inch space between the first bar and the bottom of the window. and the screen is usually on the outside of the window panel.
NOTES: Window guards do NOT substitute for adequate supervision. Child safety requires mature persons establishing and supervising children in a safe environment.
Window guards MUST protect the entire OPEN portion of window or panel for baby safety.
No space greater than 4 inches is allowed according to ASTM PS 120. (This is why double and single hung windows can not be safely mounting vertically in sliders, casements, and push-outs or pull-in windows.)
Use window stops in conjunction with Window Guards for windows that open more than 22 inches.