Mount these two 5 bar GA2335-45 Guardian Angel Window Guards MADE IN USA as vertical window barsor horizontal window grates to keep children safe . Ch ild safety and home safety experts recommend home child safety window guards with no more than 4 inch spaces between bars. Child home safety means keeping children and pets from window falls through screens or open windows. Package of two.
Guardian Angel window guards with 5 bars protect a height or width from 21 5/8 to 26 inches. Each GA2335-45 child safe window guard expands from 23 to 25 inches. Butt mounting bars butt together to keep a 4 inch space. Combine with 3, 4 or 5 bar units to fill a larger window opening safely. Recommended by City of Boston. Meets New Jersey child safety standards.
Tested to withstand up to 150 pounds of pressure in locked position.
Quick release buttons for fast window guard removal in emergencies. Guards have 4 emergency release buttons.
Adults or older children remove Guardian Angel windowguards without excessive force.
Window guards remove from inside or outside the window.
Bar spacing of 3 7/8" : exceeds 4" to 5" safety standards.
Horizontal guard height: 21 3/8", about 3" higher than most brands.
Side posts anchor with 2" sheet metal screws into solid stud or frame mats..
Six stock sizes with 4 bars fit most horizontal opening (single and double hung) windows.
Combinations of 3, 4 or 5 bar vertical mount units protect openings of vertical windows like sliders and casements.
Conforms to American Society for Testing and Material standards (ASTM F2090-01A) and recognized by the U.S. Consumer Products and Safety Commission.
Conforms to most local fire and building codes for egress type window guards.
Meets Massachusetts building codes: 780CMR 3603.14.2.2 and 780 CMR 010.4.
Made in USA.
Lifetime guarantee by manufacturer.
For large quantity orders, allow three weeks for delivery. Express shipping available depending upon inventory.
How to measure for child safety window guards:
Identify window type. VERTICAL: The window opens by sliding a panel to the side in a track, cranking a panel out or pulling or pushing a panel of glass in or out. Guards for vertical windows are mounted like prison bars to protect either the entire window opening or the entire window. SINGLE HUNG : The lower window panel moves up and down in a track. DOUBLE HUNG : Both the upper and the lower window panels move up and down, each in its own track. For Single or Double hung windows, customers usually protect only the window opening. This is done with a single guard with a window stop to keep the window from opening above the top of the mounting bar. To protect both panes, vertical guards can be mounted side by side or stacked like a ladder.
Decide where to mount window guards: Inside the window frame or extending beyond the frame with mounting bars in the studs.
Use a tape measure to measure interior width of the window frame or beyond the frame for stud mounting.
Push the bottom window panel up until it stops or push the panel to the side to measure the entire physical opening .
Treat a double or single hung window like a vertical if you wish to cover the entire window. Send us e-mail with the dimensions and we'll assist you.
Compare measurements with chart below. Guards "telescope" like curtain rods, locking into the side or top mounting bars. Guardian Angel II window guards are not spring-loaded.
Remember: horizontal and vertical window guards differ . Mounts for vertical guards are designed to butt together so that only 4 inches are between protective bars. The mounts are at the top and bottom of the window interior, often between the screen and the window glass. Mounts for horizontal guards are mounted on the sides of the window's bottom pane: there is a 4 inch space between the first bar and the bottom of the window. and the screen is usually on the outside of the window pane.
NOTES: Window guards do NOT substitute for adequate supervision. Child safety requires mature persons establishing and supervising children in a safe environment.
Window guards MUST protect the entire OPEN portion of window or panel for baby safety.
No space greater than 4 inches is allowed according to ASTM PS 120. (This is why window guards cannot be mounted parallel to the floor and partially fill sliders, casements, and push-outs or pull-in windows.)
Use window stops in conjunction with Window Guards for windows that open more than 22 inches.