In line Washing Machine FloodstopFS-3/4-H, Two 3/4 In. Ball Valves
Flood Stop FS-3/4-H for Washing Machines. 120VAC or battery power. Two 3/4 Inch hose threaded motorized ball valves with brass outlets. Included water sensor detects a leak. Controller shuts off hot and cold water to washing machine. FloodStop controls floods from broken washer hoses or washing machines leaks . Automatic water sensor activated water shut off valves reduce water damage. Floodstop FS34H is a single appliance automatic water shut-off system named by Readers Digest as one of the best 100 new products of 2004. This in-line version has NO 90° angle. One Year Limited Manufacturer Warranty
Washing Machine Flood Stop has a UL Listed class 2 wall adapter, 115ac/9v dc.
Runs on 4 AA Batteries and/or AC Adapter.
Signal outputs: (2) one normally open and one normally closed.
Motorized ball valves (2): CNC machined.
Motors operate at 6v dc.
Rated 0-180 psi. Max 250 psi. Solid brass.
Rated 32-212° F.
Alarm: beeping with mute button.ire Length from the
Water Sensor: 1.25" X 7.5", double sided. Additional sensors may be added in series. AC Adapter Cord: 6 ft. long. Controller to the Valve: About 30 Inches Long. FloodStop Controller buttons are: Mute, Close Valve and Open Valve.
Water Sensitivity adjustment. Clockwise: less sensitive. Counter Clockwise: More sensitive.
6-pin connection to valve/sensor connector.
Outputs: 2. One normally opened and one normally closed.
Contacts for any device that can utilize them, like auto phone dialer,
alarm system, X10 home automation devices.
Note: The FloodStop washing machine inline models have separate valves. Each valve is independent of the other. Each valve has a hose-threaded female spinning collar that screws onto your hot and cold water hose-bibbs, just like a hose does. Then each hose screws onto the outlet end of our FloodStop valves. So the spacing of your hose bibbs is not an issue: there are no center to center restrictions.
The loud water alarm lets you know there is a problem. Use also on home dialysis machines. This washing machine water shut off model (FS 3/4-H) is downward facing (vertical) hot and cold water hose-bibs. Downward facing hose-bibs are typical in older homes, basement settings, or unfinished walls where recessed wall box mounted hose-bibs may not be used.
NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. If no water is present and sensor sounds alarm, that means there is moisture from the floor making a complete circuit of sensor and unit. Place a cloth under sensor to "insulate" against dampness of floor or metal of pan. Once the paper or cloth gets wet, the sensor will activate the shut-off and sound the alarm. Sensor will sound if placed on metal.
Caution: Hand tighten the washing machine hoses. If you use a wrench or over-tighten the hoses, you may cause the rubber/plastic gasket to distort causing leaking from the washer hoses.
Kit Contents: everything you need to protect your property:
Two 3/4" motorized ball valves with hose fittings to install on both hot and cold water inlets.
Water sensor to place on the floor. If there is a washing machine drain pan, purchase another sensor to place inside pan.
Control Unit to be mounted with screws or Velcro (included).
AC Adapter and/or batteries for power source.
Controller has Reset and Test Buttons to Turn Water On and to Turn Water Off.
No special tools needed for installation.
Save space with the FloodStop angled motorized ball valves.
Designed to fit all brands of wall boxes.
Designed for commercial, residential, condo and apartment dwellings.
Automatic motorized ball valve closes both hot and cold valves to shut off water supply when sensors detect water from washing machine leaks.
Automatic monthly cycling of the valves.
When Leak Detected: Water supply shuts off. Alarm sounds.