shuts off water to water heaters, water softeners , water conditioners or other water devices with a 1 inch water line. Do-It-Yourself or use a plumber. The one inch full port brass water valve meets all USA drinking water requirements for lead free water valves. Uses 4 AA batteries if AC power is not nearby.
This water leak detection system shuts off water only to the protected appliance. A damp moisture sensor signals the unit, the water valve closes, the water is shut off and an alarm sounds. Power is supplied by an AC adapter/transformer or batteries. Output contacts enable the controller to connect with alarm, home automation or auto-dialer systems if desired. Installation is easy, usually within fifteen minutes.
Prevent water heaters from flooding your property.
FloodStop FS 1.00-NPT-V4 One Inch Water Valve System Components:
Motorized Full-Port Ball Valve (1.00 inch NPT pipe threaded)
Control Unit with Battery Backup (4 AA batteries, not included).
AC Power Adapter (or use 4 X AA Batteries as Primary Power Source) if a nearby AC outlet is not available.
Water/Leak Sensor (1.25” X 7.5”)
AC Adapter Cord: 6 Ft.
Wire Length from the Controller to the Valve: About 30 Inches Long.
Output Contact Wires (2)
Installation Guide (find the link in right margin of this webpage)