Bird-X Laser Bird Repeller for Indoor Use in Warehouses and Hangers
Remote controlled laser bird control and pest control (bats, rodents) device safely frightens pests away. Laser technology at random intervals
in red and green color combinations birds hate, forcing them to find
calmer landing areas. Randomized laser patterns constantly change to
prevent acclimation. Bird-X Laser is programmed to prevent acclimation of pests to an unchanging stimulus. Cycle of ON / OFF operation with intervals varying between 5 and 15 minutes OFF time for every 5 minutes ON. Cycle continues as long as the unit is turned on. Recommended for use in large indoor areas or semi-enclosed spaces. Effective coverage up to 10,000 sq. ft. Cast aluminum housing.
Bird-X Fat Beam Laser Bird Repeller Features:
Product Dimensions: 10 Inches x 9 Inches x 5 inches.
Weight: 3.31 lbs/1.5 kg
Laser Power: Red: 650nm100mW, Green: 532nm50mW
Unit Power: 1mW RED+1mW GREEN
Laser Color: Red + Green
Power: AC 100v-240v, at 50/60Hz
Electric Current: 100mA
Housing: Casting aluminum
Beam Divergence: 60°
Operating Temperature: 32–104°F/0–40°C
Safe Temperature for Use: 32–95°F/0–35°C
Requires 12V alkaline battery 23A (not included) for remote
Quality. Warranty and Guarantee: 6 months' warranty against defects in
material and workmanship from shipping date. At its option, Bird-X will
either repair or replace the unit. 30 day electronics guarantee.
Cautions for Bird-X Indoor Laser Usage:
Do not place unit in or near water. Do not mount while standing in or surrounded by water.
Lasers are regulated by the FDA. Accession numbers are on file. You may also visit the FDA web site for more information.
Mount at or above a height of 3 meters. Project beams above eye level.Do not project beams onto specular (reflective) material– for example, mirrors.
Do not project beams at room entrances. Use indoors. Outdoor use voids all warranties. not use near humans or pets.
Conform to temperature ranges in “specifications”. Diode laser is extremely sensitive to temperature, and output power is indirectly proportional to temperature. If temperature is too low, laser may need extra time towarm up to optimum output. If temperature is too high, turn up air conditioning. If temperature remains too high, it can cause damage or degradation to the diode and the long-term performance.
The Interlock Connector is a safety device for radiation, through which the factory has access to the area if repairs are needed if that does not allow the customer to access the source laser radiation, but in case repairs are needed, the factory has the key to access this area.Refer service to a qualified technician.
Caution- Use of controls or adjustments or performance of procedures other than as specified herein may result in hazardous radiation exposure!