CARDINAL GATE^, INC.
Mounting Kit Guide For Stairway Gates
No One Likes Screw Holes In fine Hardwood
Holes are permanent and can never be completely hidden. Cardinal Gates has designed wood clamps to avoid the use of screw holes when possible. The following will assist you in selecting the proper clamp kit for mounting your Cardinal stairway gates.
r^>
If
If....
If....
'--
Your Hinge Post
and
Your Latch Post are
Square at the Bottom
and Round at the Top
Order
1- Square Clamp 3- Round Clamps
28"
Your Hinge Post
and
Your Latch Post are
Square at the Bottom
and Square at the Top
Order
4- Square Clamp
Your Hinge Post
and
Your Latch Post are
Square at the Bottom,
Sqaure at the Top and
Round in the Middle
Order
3- Square Clamps 1 - Round Clamp
Lesss Than 28"
6!/ 2 "
If....
If....
Your Hinge is mount­ing to the wall and Your Latch is mount­ing to a Square Post
Order
2- Square Clamps
If....
Your Hinge is mount­ing to the wall and Your Latch is mount­ing to a Round Post
Order
2- Round Clamps
Your Hinge Post is Square at the Bottom and Round at the Top
and your latch is mounting to the wall
Order
1 -SK-l Kit
fvl
Washer »-t n
=¥t
If
Bolt Head
= =M
You are attempting to mount a Cardinal Gate to Wrought Iron
Slum/ ' Round Clamp
Square Clamp
Clamp with T-nut-should be on outside of post. Insert long bolt Ihru inner half of clamp and screw into T-nut on outside of post.
We realize that other combinations exist. We will try to assist you when possible by calling 770-252-4200
Do not mount hinge bracket on drywail unless a stud is available. Gardinal Gates (Models SS-30A and MG-25) are designed to mount at angles so that a stud can be located in most cases.