|
|  | |
| Flood Stop, Water Alarm & Flow Manager Systems for Water Leak Detection & Prevention | |
| Washer Flood Stop System FS3/4H-90 for Washing Machine Leak Detection Prevention: | |
Stop Washer Water Leaks and Washer Hose Break Water Leaks.
NEW FloodStop Washer System Model FS3/4H-90 with
BALL VALVE Flood Protection for the Laundry Room.
Prevent Flooding from Failed Washing Machines & Hoses with Flood Stop.
FloodStop is a point of use, leak detection and automatic water shut-off system
designed for residential, condo, apartment and commercial dwellings. The FS3/4H-90
uses two motorized ball valves to automatically shut off the water supply whenever
your washing machine leaks.
Washing Machines can leak plus standard washer connection hoses can fail or rupture
at any time.
- Avoid extensive property damage and expensive repairs.
- Automatically shuts off hot and cold water supplies when leak is detected.
- Quickly and easily installed by homeowner.
- Prevent additional extensive damage to floors below.
- Insures 24-hour protection, every day.
Protect your home or business from water damage. Washing Machines related flooding
can happen any time from standard washer hoses or internal failures of valves, drains,
switches or pumps. Whether you are home or away, slow leaks or flooding leaks can
go undetected for hours or even days. Safeguard your property and personal possessions
24-hours a day with Flood Stop.
Automatically shuts off water to only the Washing Machine. Sounds an alarm. All
other household plumbing fixtures and appliances are unaffected. Unlike expensive
"Whole-House" water shut off systems that are expensive require professional installation,
these "Point-of-Use" systems are affordable and easily installed.
To install, connect the two Floodstop Valves to the hot and cold water supply lines.
Mount control unit to wall. Place sensor(s) on floor. Units are operated by either
by 120 vAC adapter (included), Batteries OR BOTH!
NOTE: DO NOT PLACE SENSOR V.dirECTLY ON METAL PAN OR DAMP FLOOR. If no water
is present and sensor sounds alarm, place paper towel or cloth under sensor to "insulate"
against dampness of floor or metal of pan. Once the paper or cloth gets wet, the
sensor will activate the shut-off and sound the alarm. Sensor will sound if placed
on metal.
- Kit includes everything you need to protect your property:
- Two 3/4" motorized ball valves with hose fittings to install on both hot
and cold water inlets.
- Water sensor to place on the floor. If there is a pan under washer, purchase
another sensor to place inside pan.
- Control Unit to be mounted with screws or Velcro (included).
- AC Adapter and/or batteries for power source.
- Controller has Reset and Test Buttons to Turn Water On and to Turn Water Off.
- No special tools needed for installation.
- Save space with the FloodStop angled motorized ball valves.
- Designed for commercial, residential, condo and apartment dwellings.
- Automatic motorized ball valve closes both hot and cold valves to shut off water
supply when sensors detect water from washing machine leaks.
- Automatic monthly cycling of the valves.
- When Leak Detected:
- Turns off the water supply.
- Emits an alarm.
Technical Specifications of Washer Flood Stop:
- UL Listed class 2 wall adaptor, 115ac/9v dc.
- Signal outputs: 2 normally closed.
- Motorized ball valves (2): CNC machined with 90° downward outlet.
- Motors operate at 6v dc.
- Rated 0-180 psi. Max 250 psi. Solid brass.
- Rated 32-212° F.
- Alarm: beeping with mute button.
- Water Sensor: 1.5" X 7.5", double sided. Additional sensors may be added in series.
- FloodStop Controller:
- 3 buttons: Mute, Close Valve and Open Valve.
- Water Sensitivity adjustment. Clockwise: less sensitive. Counter Clockwise: More
sensitive.
- 4-pin connection to valve/sensor connector.
- Outputs: Normally closed. Contacts for any device that can utilize them, like auto
phone dialers, alarm systems, X10 home automations devices.
Five Year Limited Manufacturer Warranty.
Added protection against washer hose breaks, combine Flood Stop Washer Leak Detector
with Flood Chek washing machine hoses. Click here for product description.
|
|
Part Number
|
Product Description |
Price
|
| AM-FS34H-90 |
Washing Machine FloodStop FS3/4H-90
Currently In Stock (11/8/2009)
|
US$131.95
|
| SM-AM-FSSensor |
Additional Water Sensor for FloodStop System
Currently In Stock (11/8/2009)
|
US$11.00
|
| SM-FC-HOSES |
FloodChek Hoses (One Pair, 5 ft.)
Currently In Stock (11/8/2009)
|
US$49.95
|
| SM-FC-HOSES-CASE |
8 Boxed Pairs of Floodcheck Washer Hoses (5 ft.)
Currently In Stock (11/8/2009)
|
US$360.00
|
| SM-FC-HOSESQ144 |
Floodchek Hoses, 144 Boxed Pairs, 5 foot length
Ships Within 15 Business Days (11/8/2009)
|
US$5295.75
|
| SM-FC-HOSESQ180 |
Floodchek Hoses, 180 Loose Pairs, 5 foot length
Ships Within 15 Business Days (11/8/2009)
|
US$5948.00
|
|
FloodChek Hoses click here for more information.
|
|
|
|
| NEW! Hot Water Heater Flood Stop 3/4 Inch Valve (NPT) for Leak Detection Prevention: | |
Stop Hot Water Heater Water Leaks and Breaks.
Prevent Hot Water Heater from
Flooding Home or Business
Failure Activated Flood System.
New Generation FloodStop (FS 3/4-NPT) kits automatically shut off the water supply
to the Water Heater and sounds an alarm, leaving all other household fixtures and
appliances operational. Powered by AC Adaptor/Transformer or Batteries. Output contacts
available, which allow the Controller to connect with Alarm, Home Automation or
Auto-Dialer systems if desired. Easily installed in fifteen minutes.
Water Heaters have a limited life of typically 5 to 10 years due to corrosion of
tank and pipes. Leaks come without warning.
- Avoid flooding and costly property damage expenses.
- Detect micro-leaks before undetected water leaking creates mold.
- Automatically shuts off water supply when problem occurs.
- Quickly and easily installed by homeowner.
- Prevent additional extensive damage to floors below from clogged drains or overflowed
"pans."
- Prevent high water bills from continuous running or leaking water.
- Insures 24-hour protection, every day.
Protect your home and insurance coverage from flooding and property damage. Water
Heaters are generally considered a maintenance-free appliance. A failed water heater
is the single most damaging water appliance in a home. A water heater typically
lasts from 5 to 10 years. Extensive water damage is more likely because slow leaks
can go unnoticed and water under pressure can blow the bottom off the tank.
Whether you are home or away, water heater failure can go undetected for hours or
days. The FloodStop automatically shuts off the water heater cold water supply.
All other water appliances and plumbing fixtures remain operational. Unlike more
expensive "Whole-House" shut off systems that need a plumber to install, these "Point-of-Use"
systems are very affordable and easily installed by the homeowner.
To install, connect valve to the cold water line going into the water heater. Mount
the control unit. Place sensor(s) on floor. Plug power supply into an unswitched
outlet. Electricity is used only when the sensor detects water.
NOTE: DO NOT PLACE SENSOR V.dirECTLY ON METAL PAN OR DAMP FLOOR. If no water
is present and sensor sounds alarm, place paper towel or cloth under sensor to "insulate"
against dampness of floor or metal of pan. Once the paper or cloth gets wet, the
sensor will activate the shut-off and sound the alarm. Sensor will sound if placed
on metal.
How FloodStop (FS 3/4-NPT) Works:
- The FloodStop valve is installed between the Water Heater and its manual shutoff
valve.
- Water/leak sensor is placed at the base of the Water Heater.
- Valve stays open until water loss is detected.
- Water on sensor closes FloodStop valve and sounds alarm.
- Valve stays closed until problem is attended to and system is reset.
FloodStop (FS 3/4-NPT) Components:
- Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded).
- Control Unit with Battery Backup (4 C batteries, not included).
- AC Power Adaptor (or use 4 X C Batteries as Primary Power Source).
- Water Leak Sensor.
- Output Contact Wires (2).
Technical Specifications:
- UL Listed Class 2 Wall Adaptor, 115AC/9VDC.
- UPC listedFull Port, Motorized Ball Valve: CNC machined.
- Motor operates at 6VDC.
- Rated 0-180 PSI. Max 250 PSI. Solid Brass.
- Signal Outputs: 2 normally closed.
- Alarm: Beeping with Mute Button.
Features:
- For added water detection protection, add more sensors. Sensors plug into sensors,
NOT the Control Box.
- The 3/4 inch valve is 4.5 inches long.
- Controller has reset and test buttons to turn water on and to turn water off and
battery back up.
- Easy to install, operate, and maintain.
- No special tools needed for installation.
- Designed for residential, condo and apartment dwellings.
- Full Port Ball Valve automatically shuts off water to water heater when water sensor/sensors
get wet.
- Power: 120VAC and/or battery backup (4 C batteries).
- No wires to route throughout the home
- Alarm: beeping with mute button.
- Water Sensor: 1.5" X 7.5", double sided. Additional sensors may be added in series.
- FloodStop Controller:
- 3 buttons: Mute, Close Valve and Open Valve.
- Water Sensitivity adjustment. Clockwise: less sensitive. Counter Clockwise: More
sensitive.
- 4-pin connection to valve/sensor connector.
- Outputs: Normally closed. Contacts for any device that can utilize them, like auto
phone dialers, alarm systems, X10 home automations devices.
Five Year Limited Manufacturer Warranty.
|
|
Part Number
|
Product Description |
Price
|
| NEW-FS34NPT |
FloodStop 3/4 Inch Valve Water Heater Shutoff NPT
Currently In Stock (11/8/2009)
|
US$103.95
|
| SM-AM-FSSensor |
Additional Water Sensor for FloodStop System
Currently In Stock (11/8/2009)
|
US$11.00
|
|
|
|
| Hot Water Heater Flood Stop 1 1/4 Inch Valve (NPT) for Leak Detection Prevention: | |
Stop Hot Water Heater Water Leaks and Breaks.
Prevent Hot Water Heater from
Flooding Home or Business
Failure Activated Flood System.
FloodStop (FS 1 1/4-NPT) kits automatically shut off the water supply to the Water
Heater and sounds an alarm, leaving all other household fixtures and appliances
operational. Powered by AC Adaptor/Transformer or Batteries. Output contacts available,
which allow the Controller to connect with Alarm, Home Automation or Auto-Dialer
systems if desired. Easily installed in fifteen minutes.
Water Heaters have a limited life of typically 5 to 10 years due to corrosion of
tank and pipes. Leaks come without warning.
- Avoid flooding and costly property damage expenses.
- Detect micro-leaks before undetected water leaking creates mold.
- Automatically shuts off water supply when problem occurs.
- Quickly and easily installed by homeowner.
- Prevent additional extensive damage to floors below from clogged drains or overflowed
"pans."
- Prevent high water bills from continuous running or leaking water.
- Insures 24-hour protection, every day.
Protect your home and insurance coverage from flooding and property damage. Water
Heaters are generally considered a maintenance-free appliance. A failed water heater
is the single most damaging water appliance in a home. A water heater typically
lasts from 5 to 10 years. Extensive water damage is more likely because slow leaks
can go unnoticed and water under pressure can blow the bottom off the tank.
Whether you are home or away, water heater failure can go undetected for hours or
days. The FloodStop automatically shuts off the water heater cold water supply.
All other water appliances and plumbing fixtures remain operational. Unlike more
expensive "Whole-House" shut off systems that need a plumber to install, these "Point-of-Use"
systems are very affordable and easily installed by the homeowner.
To install, connect valve to the cold water line going into the water heater. Mount
the control unit. Place sensor(s) on floor. Plug power supply into an unswitched
outlet. Electricity is used only when the sensor detects water.
NOTE: DO NOT PLACE SENSOR V.dirECTLY ON METAL PAN OR DAMP FLOOR. If no water
is present and sensor sounds alarm, place paper towel or cloth under sensor to "insulate"
against dampness of floor or metal of pan. Once the paper or cloth gets wet, the
sensor will activate the shut-off and sound the alarm. Sensor will sound if placed
on metal.
How FloodStop (FS 1 1/4-NPT) Works:
- The FloodStop valve is installed between the Water Heater and its manual shutoff
valve.
- Water/leak sensor is placed at the base of the Water Heater.
- Valve stays open until water loss is detected.
- Water on sensor closes FloodStop valve and sounds alarm.
- Valve stays closed until problem is attended to and system is reset.
FloodStop (FS 1 1/4-NPT) Components:
- Motorized Full-Port Ball Valve (1 1/4 inch NPT pipe threaded).
- Control Unit with Battery Backup (4 C batteries, not included).
- AC Power Adaptor (or use 4 X C Batteries as Primary Power Source).
- Water Leak Sensor.
- Output Contact Wires (2).
Technical Specifications:
- UL Listed Class 2 Wall Adaptor, 115AC/9VDC.
- UPC listedFull Port, Motorized Ball Valve: CNC machined.
- Motor operates at 6VDC.
- Rated 0-180 PSI. Max 250 PSI. Solid Brass.
- Signal Outputs: 2 normally closed.
- Alarm: Beeping with Mute Button.
Features:
- For added water detection protection, add more sensors. Sensors plug into sensors,
NOT the Control Box.
- The 1 1/4 inch valve is 4.5 inches long.
- Controller has Reset and Test Buttons to Turn Water On and to Turn Water Off and
battery back up.
- Easy to install, operate, and maintain.
- No special tools needed for installation.
- Designed for residential, condo and apartment dwellings.
- Full Port Ball Valve automatically shuts off water to water heater when water sensor/sensors
get wet.
- Power: 120VAC and/or battery backup (4 C batteries).
- No wires to route throughout the home
- Alarm: beeping with mute button.
- Water Sensor: 1.5" X 7.5", double sided. Additional sensors may be added in series.
- FloodStop Controller:
- 3 buttons: Mute, Close Valve and Open Valve.
- Water Sensitivity adjustment. Clockwise: less sensitive. Counter Clockwise: More
sensitive.
- 4-pin connection to valve/sensor connector.
- Outputs: Normally closed. Contacts for any device that can utilize them, like auto
phone dialers, alarm systems, X10 home automations devices.
Five Year Limited Manufacturer Warranty.
|
|
Part Number
|
Product Description |
Price
|
| AM-FS125NPT |
FloodStop Water Heater 1.25 Inch Ball Valve (NPT)
Currently In Stock (11/8/2009)
|
US$119.95
|
| SM-AM-FSSensor |
Additional Water Sensor for FloodStop System
Currently In Stock (11/8/2009)
|
US$11.00
|
|
|
|
| FloodStop for IceMaker or Water Filter: For Leak Detection Prevention on 1/4 Inch Lines | |
NEW GENERATION:
Prevent flooding from Water Filter or Icemaker: Water Filter and Icemaker
components are small and break easily. Water-line breaks develop from movement,
accidental bumping and simple vibration. In many cases a crack in the water-line
grows from simple vibrations, eventually and unexpectedly rupturing, and then flooding
the property. Whether at home, at work, or on vacation these flooding events can
go undetected for hours or even days.
FloodStop (FS1/4C) automatically shuts off the water supply and sounds an
alarm, leaving all other household fixtures and appliances operational. Easily installed
in about ten minutes. Fits anything that can connect to the 1/4" compression fitting
valve like an icemaker, water filters, mini-bars and more.
- Avoid flooding and costly property damage expenses.
- Detect micro-leaks before undetected water loss creates mold.
- Automatically shuts off water supply when problem occurs.
- Quickly and easily installed by homeowner.
- Prevent additional extensive damage to floors below.
- Insures 24-hour protection, every day.
FloodStop (FS 1/4-C) Components:
- Motorized Full-Port Ball Valve (1/4" Compression).
- Control Unit with Battery Backup (4 C batteries, not included).
- AC Power Adaptor (or use 4 X C Batteries as Primary Power Source).
- Water Leak Sensor.
- Output Contact Wires (2).
How FloodStop (FS 1/4C) Works:
- The FloodStop valve is installed between water supply/angle-stop and the appliance
(located nearest to the water supply/angle-stop).
- Water/leak sensor is placed at the base of the appliance (Icemaker/Refrigerator,
Water Filter, etc.) An extra sensor may also be placed by valve on wall insert.
- Water on sensor closes FloodStop valve and sounds alarm
- Valve stays closed until problem is attended to, and system is reset
Features and Technical Specifications:
- For added water detection protection, add more sensors. Sensors plug into sensors,
NOT the Control Box.
- Controller has Reset and Test Buttons to Turn Water On and to Turn Water Off.
- No special tools needed for installation.
- Designed for residential, condo and apartment dwellings.
- Uses automatic valve to shut off the water supply whenever refrigerator or freezer
leaks.
- No wires to route throughout the home
- Minimal current draw for the LED
- When Leak Detected:
-
Turns off the water supply.
-
Emits an Alarm.
- UL Listed Class 2 Wall Adaptor, 115AC/9VDC.
- Full Port, Motorized Ball Valve: CNC machined.
- Motor operates at 6VDC.
- Rated 0-180 PSI. Max 250 PSI. Solid Brass.
- Signal Outputs: 2 normally closed.
- Alarm: Beeping with Mute Button.
- Water Sensor: 1.5" X 7.5", double sided. Additional sensors may be added in series.
- FloodStop Controller:
- 3 buttons: Mute, Close Valve and Open Valve.
- Water Sensitivity adjustment. Clockwise: less sensitive. Counter Clockwise: More
sensitive.
- 4-pin connection to valve/sensor connector.
- Outputs: Normally closed. Contacts for any device that can utilize them, like auto
phone dialers, alarm systems, X10 home automations devices.
- Five Year Limited Manufacturer Warranty.
|
|
Part Number
|
Product Description |
Price
|
| AM-FS14C |
FloodStop 1/4 Inch ICEMAKER Water System
Currently In Stock (11/8/2009)
|
US$92.95
|
| SM-AM-FSSensor |
Additional Water Sensor for FloodStop System
Currently In Stock (11/8/2009)
|
US$11.00
|
|
|
|
| NEW! Dishwasher, Toilet or Icemaker 3/8 Inch Water Line: Flood Stop System 3/8C for Leak Detection Prevention | |
Prevent Flooding from Dishwasher Water-Line Breaks & Water Leaks. Fits 3/8" Outer
Diameter Lines.
Prevent Water Damage from Dishwashers, Toilets, or Icemaker Water-Line Breaks. Water
Line and Fitting can Crack from Age or Impact.
- Avoid flooding and costly property damage expenses.
- Detect micro-leaks before undetected water loss creates mold.
- Automatically shuts off water supply when problem occurs.
- Quickly and easily installed by homeowner.
- Prevent additional extensive damage to floors below.
- Insures 24-hour protection, every day.
Prevent water damage from failed Dishwasher and Supply Line: Dishwasher leaks
are often small and go unnoticed until significant damage is finally discovered.
Such a leak will continue to collect under the Dishwasher and then seep between
the kitchen flooring and sub-flooring. The damage often goes undetected until the
floor is visually buckled or warped, at which time the damage and cost to replace
is extensive.
FloodStop (FS 3/8C) automatically shuts off the water supply to the Dishwasher,
whether caused by a small continuous leak, broken component, leaking door seal,
or a ruptured supply line. Easily installed in around ten minutes.
How FloodStop (FS 3/8C) Works:
- The FloodStop valve is connected to the angle stop and supply line
- Water/leak sensor is placed at the base of the appliance or fixture (Dishwasher;
Sink; 3/8" Icemaker; Toilet; etc.)
- Valve stays open until water loss is detected
- Water on sensor closes FloodStop valve and sounds alarm
- Valve stays closed until problem is attended to and system is reset
Components:
- Motorized Full-Port Ball Valve (3/8" Compression).
- Control Unit with Battery Backup (4 C batteries, not included).
- AC Power Adaptor (or use 4 X C Batteries as Primary Power Source).
- Water Leak Sensor.
- Output Contact Wires (2).
Features and Technical Specifications:
- For added water detection protection, add more sensors. Sensors plug into sensors,
NOT the Control Box.
- No special tools needed for installation.
- Designed for residential, condo and apartment dwellings.
- Uses automatic valve to shut off the water supply whenever refrigerator or freezer
leaks.
- No wires to route throughout the home
- Minimal current draw for the LED
- When Leak Detected:
-
Turns off the water supply.
-
Emits an Alarm.
- UL Listed Class 2 Wall Adaptor, 115AC/9VDC.
- Full Port, Motorized Ball Valve: CNC machined.
- Motor operates at 6VDC.
- Rated 0-180 PSI. Max 250 PSI. Solid Brass.
- Signal Outputs: 2 normally closed.
- Alarm: Beeping with Mute Button.
- Water Sensor: 1.5" X 7.5", double sided. Additional sensors may be added in series.
- FloodStop Controller:
- 3 buttons: Mute, Close Valve and Open Valve.
- Water Sensitivity adjustment. Clockwise: less sensitive. Counter Clockwise: More
sensitive.
- 4-pin connection to valve/sensor connector.
- Outputs: Normally closed. Contacts for any device that can utilize them, like auto
phone dialers, alarm systems, X10 home automations devices.
- Five Year Limited Manufacturer Warranty.
|
|
Part Number
|
Product Description |
Price
|
| AM-FS38C |
Dishwasher and Toilet FloodStop 3/8 Inch Compression
Currently In Stock (11/8/2009)
|
US$94.95
|
| SM-AM-FSSensor |
Additional Water Sensor for FloodStop System
Currently In Stock (11/8/2009)
|
US$11.00
|
|
|
|
| Additional Sensors for Flood Stop Systems 1, 2 & 3 | |
For added water detection protection,
add more sensors. Sensors plug into sensors, NOT the Control Box.
NOTE: DO NOT PLACE SENSOR V.dirECTLY ON METAL PAN OR DAMP FLOOR. If no water
is present and sensor sounds alarm, place paper towel or cloth under sensor to "insulate"
against dampness of floor or metal of pan. Once the paper or cloth gets wet, the
sensor will activate the shut-off and sound the alarm. Sensor will sound if placed
on metal.
- Water Sensors work with all FloodStop products
- Additional sensor(s) can be plugged into one another in series (comes with 1 meter
wire)
- Example: Additional Sensor allows one sensor to be placed behind the Washer and
the other sensor behind the Dryer
- Example: Additional Sensor allows one sensor to be placed inside the water heater
pan and the other sensor outside the pan
- Water Sensor: 1.5" X 7"
- Five Year Limited Manufacturer Warranty.
|
|
Part Number
|
Product Description |
Price
|
| SM-AM-FSSensor |
Additional Water Sensor for FloodStop System
Currently In Stock (11/8/2009)
|
US$11.00
|
|
|
|
| Power Adapter Extension Wire for Floodstop Units | |
"Transformer Extension Wire" for
all FloodStop Systems
- Water Sensors work with all FloodStop products that run on 4 "AA" batteries. NOT
the newer systems that run on 4 "C" batteries.
- Example: Water Heaters are not always located near an electrical outlet, so consider
purchasing a "transformer extension wire"
- 15 feet long, white cord
- Transformer Extension Wire plugs into end of the transformers wire
- Thin white extension wire makes connection simple and virtually out of sight
- Five Year Limited Manufacturer Warranty.
|
|
Part Number
|
Product Description |
Price
|
| SM-AM-FSXW |
FloodStop Transformer Extension Wires
Currently In Stock (11/8/2009)
|
US$10.95
|
|
|
|
| The Water Alarm: Stand Alone Water Detection System | |
Stand alone water detector with built in loud alarm for early water leak detection.
The Water Alarm: Detect leaks before they have a chance to get out of control.
Early warning for leaky pipes, faulty water heaters, dishwashers and washing machines.
DOES NOT AUTOMATICALLY SHUT WATER OFF. THIS IS A WATER DETECTOR ONLY!
Leaking pipes, rising ground water, failed appliances and leaking roofs all cause
property damage. Whether the water incursion starts small and develops into a large
flow or is a small continual drip, serious water damage will occur. Without an early
warning alarm these damaging events often go undetected long after the problem first
started.
The Water Alarm provides an early warning alert whenever water or moisture
is detected before mold, mildew and serious water damage can occur. It can be placed
anywhere you desire the early notification of a problem. Use the Water Alarm to
detect those small leaks before they can get out of control. More homes are damaged
by water than fire every year!
How Water Alarm Works: Battery operated, the Water Alarm will sit anywhere
and monitor for even the smallest leaks. Sensors in the Water Alarm feet will pick
up the slightest signs of moisture and sound its alarm, alerting you to potential
trouble. The Water Alarm will detect standing or running water, condensation, or
moisture in carpeting or other types of flooring. When water comes in contact with
any two adjacent metal legs, the alarm will sound.
Common Uses: Leaky pipes, sewer backup, flooding, water heater, washing machine,
bath tub, hot tub, sink, toilet, dishwasher, water bed, water softener, swamp cooler,
refrigerator, aquarium and more. Place a Water Alarm in any room where water could
cause damage. Every year, billions of dollars in property damage is due
to water leaks.
Water Alarm Features:
- Simple installation—set anywhere problem moisture could occur.
- Safe to use around children and pets.
- Very affordable—buy enough units to protect your home.
- Extra-loud alarm sounds at 110+ db for up to 72 hours.
- Outer shell constructed of durable ABS plastic.
- Tip resistant design.
- Size: 3" Diameter x 3" Tall.
- Operates on a standard 9-volt battery (not included).
- Low battery warning. Chirps when battery is low.
- Long battery life. New batteries required once a year.
- Sensors detect even small amounts of moisture before damage can occur. No standing
water required.
- Stainless steel sensors. Will not corrode or stain.
- Sensor contacts will sink deep into carpet, thus detecting the first signs of moisture
below the carpet’s surface.
- Completely electronic. No moving parts to fail or wear out.
- Optional: Sump Pump Attachment:
- Acts as a sump overflow warning, bathtub full alert or hot tub full alert.
- Easily attach to the bottom of the Water Alarm by gently sliding the open end of
each connector on the bottom of the Water Alarm.
- When installing, test sensor by immersing in 1" or more of water.
- 1 year limited manufacturer's warranty.
- Manufactured by Gizmode Innovations.
- 1 year limited manufacturer's warranty.
|
|
Part Number
|
Product Description |
Price
|
| AM-WA01 |
Gizmode Stand Alone Water Alarm Detector
Currently In Stock (11/8/2009)
|
US$26.95
|
| AM-WA01-Q2 |
TWO (2) Gizmode Stand Alone Water Alarm Detectors
Currently In Stock (11/8/2009)
|
US$45.90
|
| AM-WA01-Q4 |
FOUR (4) Gizmode Stand Alone Water Alarm Detector
Currently In Stock (11/8/2009)
|
US$80.38
|
| AM-SA01 |
Sump Attachment Wire for Gizmode Water Alarm
Currently In Stock (11/8/2009)
|
US$9.95
|
|
|
|
|
|
