|
|  |  |
| Child Safety Guards & Straps for Home Safety and Industrial Safety | |
For DVD Players, CD Players and Stereos.
DVD Guard is a clear plastic shield that increases child safety while keeping
expensive equipment from toddler's button playing. Keep fingers and peanut
butter sandwiches out of openings.
DVD Guard covers buttons and entire front panel including disc drawer. Velcro attaches
transparent Guard. Remote controls remain operational. Adults can remove the Guard
easily while proving child safety and protecting equipment.
Features:
- Quality clear plastic shield attaches to front with three adhesive backed "Velcro"
style squares.
- "L" shaped side view.
- Shield dimensions: 16 1/2" wide x 3 1/8" high x 2 3/4" deep.
- Allow 10 hours for adhesive to set before trying to remove.
- Suggestion: Childproof when children are not present, i.e. asleep for the night.
- Remember: No protective device takes the place of adult supervision.
|
| SF-PU-13027 |
DVD Guard Transparent DVD and Stereo Protection 16 In.
Currently In Stock (2/12/2012)
|
US$12.95
|
|
|
|
For Television Sets
Even little Americans love TV. Toddlers love to push the buttons to change stations,
volume, etc. Parents love the TV Guard, a clear plastic shield that keeps
buttons where you set them. Remote controls remain operational.
Features:
- Quality clear plastic shield has four adhesive backed rubber bump-ons plus low skid
underlay material.
- "L" shaped side view.
- Shield dimensions: 18 5/8" wide x 3 1/2" high x 2 3/8" deep.
- The 2 3/8" side is placed under TV's front. The low skid material goes under
back of TV to reduce TV from sliding.
- Suggestion: Install child safety devices when children are not present i.e. asleep
for the night.
- Remember: No protective device takes the place of adult supervision.
|
| SF-PU-22663 |
TV Control Panel Cover Clear TV Guard Removable, 18 in.
Currently In Stock (2/12/2012)
|
US$13.00
|
|
|
|
| TV Guard for Larger TV's & Home Theatres | |
For Larger TV's
and Home Theaters
This removable front-mounting system protects home theater systems, new flat screens
and televisions 32" and larger. Baby safety is increased as babies cannot push buttons.
Remote control remains operational. Special fasteners allow easy removal when remote
control is low on batteries, lost or broken. Unit is physically smaller than the
original TV guard as unit mounts directly on TV.
Features:
- Covers controls so toddlers cannot see nor push the buttons.
- Translucent so remote control operates.
- Fastens with Velcro: adults can easily remove as needed.
- Small panel sizes allows installation wherever controls are located.
- Dimensions: 10" long x 1 1/8" high x 1/4" deep.
- Allow 10 hours for adhesive to set before trying to remove.
- Suggestion: Childproof when children are not present, i.e. asleep for the night.
- Remember: No protective device takes the place of adult supervision.
|
| SF-PU-10121 |
TV Guard Removable Control Button Blocker, 10 x 1 inch
Currently In Stock (2/12/2012)
|
US$9.95
|
|
|
|
| TV Guard for Flat Screens, Computer Monitors, LCD/Plasma Monitors (6 in x 1.5 in) | |
Button Blocker For
TV and Computer Monitors, LCD/Plasma Monitors & Large Power Buttons
Great for smaller button panels. This removable front-mounting system protects new
flat screens, computer monitors, LCD and Plasma Monitors. Perfect for covering large
individual buttons, such as power buttons on certain makes and models. Baby safety
is increased as babies cannot push buttons. Remote control remains operational.
Special fasteners allow easy removal when remote control is low on batteries, lost
or broken.
Features:
- Covers controls so toddlers cannot see nor push the buttons.
- Translucent so remote control operates.
- Fastens with Velcro: adults can easily remove as needed.
- Small panel sizes allows installation wherever controls are located.
- Dimensions: 6" x 1.5" x 0.25" deep.
- Allow 10 hours for adhesive to set before trying to remove.
- Suggestion: Childproof when children are not present, i.e. asleep for the night.
- Remember: No protective device takes the place of adult supervision.
|
|
|
|
For VCR's, DVD's
and CD Players.
VCR Guard covers entire front panel. Guards unit from toddler's button
pushing and pushing fingers, toys, etc. into the VCS tape slot. Child safety increases
as children cannot get fingers caught in small places. Fewer "no's" by parents.
Special fasteners allow easy removal by adults. Remote control operates while children
cannot play with buttons.
Features:
- Quality clear plastic shield attaches with two (2) adhesive backed "Velcro" style
squares.
- "L" shaped side view.
- Shield dimensions: 14" wide x 3 1/2" high x 2 3/8" deep.
- Allow 10 hours for adhesive to set before trying to remove.
- Suggestion: Install when children are not present, i.e. asleep for the night.
- Remember: No protective device takes the place of adult supervision.
|
| SF-PU-01213 |
Clear Panel Guard Protects VCR, DVR or Cable Boxes, 14"
Currently In Stock (2/12/2012)
|
US$12.95
|
|
|
|
| PC Guard for Computer Towers | |
PC Tower Protector
does it all.
Prevent costly PC damage. PC Guard is an adjustable durable cover designed
to safeguard systems from little programmers. The entire front panel of the tower
is covered. This protects DVD/CD draws, power buttons and disc drawers. Improve
child safety while protecting valuable computer components.
Features:
- Entire tower front is covered so toddlers cannot see nor push the buttons.
- Black plastic backed nylon with "Velcro" sewn on each "flap".
- Easily removed by adults.
- Dimensions: 16" wide x 16" high. Not square, see picture above left.
- Allow 10 hours for adhesive to set before trying to remove.
- Suggestion: Install when children are not present, i.e. asleep for the night.
- Remember: No protective device takes the place of adult supervision.
|
| SF-PU-02450 |
PC Guard Tower Protector Removable Panel Cover, Grey
Currently In Stock (2/12/2012)
|
US$9.95
|
|
|
|
| Wire Guard: Electrical Cord Covers to Hide Wiring from Toddlers and Pets | |
Electrical Cord Safety:
Conceal Cords, Cover Cables & Hide Wires.
Make Rooms Neater and Safer!
Organize Wires!
Reduce Electrical Shock Risk!
Wire Guard, electrical cord cover, makes rooms neater while effectively covering
extension cords, cables, speaker and other electrical wires. With its sleek design,
Wire Guard looks like thin wall molding. Easy to use. Snap it open. Place wires
inside. Snap it closed. Holds up to four wires. Attaches to existing wall molding
with easy-to-apply tape.
Improve household electrical child safety with little effort. Protect pets from
chewing wires. Keep children from pulling and chewing on electrical cords.
Features:
- Each set consists of 2 (two) 16" strips (32" total)
- Color: White
- Can be used horizontally or vertically.
- Looks like white molding.
- Opens easily, snaps closed.
- Pet cord safety and child electrical cord safety.
- SAFETY WARNING: Not for use across floors. Use of this product across a floor could
create a trip hazard.
- Allow double sided tape to set for ten hours before opening Wire Guard casing.
- Remember: No protective device takes the place of adult supervision.
|
| SF-PU-62798 |
Parent Units Molded Electrical Cord and Wire Covers
Currently In Stock (2/12/2012)
|
US$14.95
|
| SF-PU-62798-2 |
Wire Guard Electrical Wire Covers, White, 2 Sets
Currently In Stock (2/12/2012)
|
US$24.00
|
| SF-PU-62798-4 |
Wire Guard Molded Electrical Cord Covers 4 Sets
Currently In Stock (2/12/2012)
|
US$52.00
|
|
|
|
Reduce the Danger of
Unsecured Equipment Falling on Your Children!
Equipment Safety Straps secure appliances from moving, slipping or sliding to increase
child safety and your own. Use only on secure stand or wall unit. Recommended for
televisions, VCR's, computers, microwaves and other appliances.
Features:
- Anti-Slip.
- Anchors most appliances, furniture and equipment.
- Helps hold equipment safely and securely.
- Easy to use, just peel and press the adhesive square in place.
- Contains 2 black buckles (2" x 2") and a 5" black locking strap (5/8" wide).
- Bonding Time: Four hours for adhesive to set before adding strap. Full bonding after
72 hours.
- Use 2 Safety Straps for "low profile" equipment up to 50 lb.
- 4 Safety Straps increase protection for heavier weight and top heavy equipment.
Recommended weight range is up to 100 lbs.
- Suggestion: Install when children are not present, i.e. asleep for the night.
- Product Performance Warranty: This product does NOT replace
child supervision. This product is only intended to help or reduce movement of equipment
during jarring movement. It is common understanding that fastened equipment should
fare better during jarring movement than equipment that is not fastened, helping
to reduce the amount of damage and injury that could result. No warranty can be
properly applied to the performance of the products due to the uncertainty of forces
generated, and numerous variables involved in a jarring event, or natural disaster.
Products that are defective in material and workmanship prior to installation of
the product will be replaced. The user or third party installer accepts liability
for injury, loss, or damage, direct or consequential, arising from use or misuse
or inability to use the product.
|
| SF-PU-01111 |
Equipment Safety Straps for Appliances, BLACK
Currently In Stock (2/12/2012)
|
US$12.75
|
| SF-PU-01111-2 |
Furniture Straps for Safe Secure Equipment, Black 2/PK
Currently In Stock (2/12/2012)
|
US$25.50
|
| SF-PU-01111-4 |
Child Safety Straps Secure Equipment, Black 4/PK
Currently In Stock (2/12/2012)
|
US$51.00
|
|
|
|
| TOPPLE STOP Furniture Straps | |
Increase Child Safety
Levels in Your Home by Reducing the Risk of Unsecured Furniture Falling on Your
Children.
Use on:
- Dressers
- Wall Units
- TV Stands
- Entertainment Centers
- Microwave Carts
- Other Furniture which can be tipped or toppled.
Topple Stop will secure household furniture to a wall stud. This fastening
system greatly reduces risk of furniture topple. Appliances or furniture to be secured
must have slip-resistant bases. Use for metal cabinets/appliances or wood furniture.
Determine number of fastener sets by the weight of the unit to be stabilized.
Installation information:
- Anchors appliances and furniture up to 400 pounds.
- Note: "Four Point" attachment (two kits) required for 200 to 400 pound items. Minimum
of "Two Point" attachment (one kit) required by up to 200 pounds.
- Fastener attachment for Metal Units: Using adhesive pads, attach fasteners to dry
surface cleaned with isopropyl alcohol.
- Fastener attachment for Wood Units: Using #8 x 1" wood screws, attach fasteners
to frame or inside edges (top or sides) of furniture.
- Strap attachment: Use #10 x 2" wood screws to wall studs. Use "t-bar" anchors to
toggle bolts to attach to metal studs. Wall anchors can be used if each has a minimum
holding strength of 100 pounds.
- Product Performance Warranty: This product does NOT replace
child supervision. This product is only intended to help or reduce movement of equipment
during jarring movement. It is common understanding that fastened equipment should
fare better during jarring movement than equipment that is not fastened, helping
to reduce the amount of damage and injury that could result. No warranty can be
properly applied to the performance of the products due to the uncertainty of forces
generated, and numerous variables involved in a jarring event, or natural disaster.
Products that are defective in material and workmanship prior to installation of
the product will be replaced. The user or third party installer accepts liability
for injury, loss, or damage, direct or consequential, arising from use or misuse
or inability to use the product.
Each Kit Contains 2 Topple Stops Which Includes:
- Two (2) grey Thumb Lock fasteners, 2" long by one wide with 3/4" lock lever. Use
with wood screws or 3M VHB adhesive attachment. (Bonding Times: Wait four hours
before adding strap. Adhesive fully bonds after 72 hours.)
- Two (2) 12" long, 3/4" wide grey locking strap with grommet for wood screw attachment.
- Four (4) #8 x 1" wood screws for furniture attachment
- Two (2) #10 x 2" wood screws for wood wall stud attachment.
Thumb lock fastener attaches to locking strap. Fastener can be moved and locked
in either V.direction on the strap. Lift locking lever to "open." Lock fastener
on strap by pushing lever down firmly. Note: Thumb Lock adhesive is non-hardening.
Fasteners can be removed without damaging surface if slowly and gently pried off
with appropriate tool.
Suggestion: Install when children are not present, i.e. asleep for the night.
|
| SF-PU-92430 |
Topple Stops Wall Stud Mount Furniture Straps, GREY
Currently In Stock (2/12/2012)
|
US$17.95
|
| SF-PU-92430-2 |
Topple Stop Wall Stud Mount Furniture Straps GREY 2/BX
Currently In Stock (2/12/2012)
|
US$30.00
|
|
|
|
| Fridge Guard (Kitch Hitch) | |
Appliance Safety Latch!
Fridge Guard is made in the USA of strong durable plastic with high-bonding
adhesive that will not mar refrigerator surface. Undisputed champ for favorite among
professional childproofers. Increase child safety in your home while protecting
contents of your refrigerator or freezer from dumps, spills, and disasters from
doors left ajar.
- Easily Installed: Choose side or top of appliance for double doors and freezers.
Remove red liner from clear tape of hook and apply to door with hook facing forward.
Then remove tape on latch and apply to determined location. Press firmly for 20
seconds. Allow to set overnight.
- Easily Used: To open refrigerator, simply apply inward pressure on door handle
and release flexible latch over hook. Latch resets automatically when door closes.
- Easily Removed: When no longer needed, gently pry off hook and latch. Simply
use olive oil to easily clean off any adhesive residue.
- Clear or White.
- Remember: No protective device takes the place of adult supervision.
|
| SF-PU-00131-C |
Refrigerator Locking Latch, Fridge Guard, CLEAR
Currently In Stock (2/12/2012)
|
US$7.25
|
| SF-PU-00131-W |
Refrigerator Lock, Fridge Guard Lock, WHITE
Currently In Stock (2/12/2012)
|
US$7.25
|
|
|
|
| Sippin Spouts: Turns Drink Bottles Into Sippers | |
Turns Standard Drink
Bottles Into Sippers!
Sippin' Spouts: Don't Carry a Cup; Just Carry a Cap for Pocket Sized Convenience!
Easily convert popular sized water and beverage bottles into spill resistant Sippers.
Now your toddler can have a Sipper wherever you go. Why rush to fill cups every
time you leave the house? Just grab a spout and a drink. Instant Sipper. Great when
you want to travel light. Keep one in the car glove box for spill resistant drinks.
Great anti spill drink top for the whole family at home, play or work.
- Directions: Simply remove bottle cap from beverage. Secure Sippin Spout and
enjoy.
- Safety Note: Always attend your child while eating or drinking.
- Contains: Two types of spout threads (one red, one yellow) for different
common drink tops.
- Fits: Fits any standard pop, soda, or water bottles (1 1/4" diameter). Does
not fit baby bottles.
|
| SF-PU-07443 |
Sippin Spouts (2) Sipper Tops For Std Drink Bottles
Currently In Stock (2/12/2012)
|
US$4.86
|
|
|
|
| Additional Child Safety Products: | |
//V.CloseRoundedTable()
Response.Write("");
V.DisplayBar();
Response.Write(" ");
V.Suggestions("SF");
Response.Write(" ");
V.DisplayBar();
Response.Write(" ");
//V.Banner()
V.StdRHSBotofPage(V.SHP_Repeats);
%>
| |