WHITE 7 Bar Lift Out MAX Window Guard 30 x 24-42 Inches JS-1177

Not sure which Window Guard is for you? Try our Selection Wizard

Window Guards Keep Children Safe

Looking for a child safety window guard that has a home security option? Protection from window falls and intruders is now available in a single series of heavy duty window bar units. These dual purpose John Sterling Max Window Guards have angular bars and locking options.

For child safety or security, the John Sterling 1170 series 7 Bar Long Off-White Lift Out MAX windowguard with dual locking brackets can be used in both sleeping and non-sleeping areas. Childproof window openings 30 to 34 inches high in traditional windows that move up and down and are 24 to 42 inches wide. Or mount vertically to protect casements or sliders that are 30 to 34 inches wide and 24 to 42 inches high. Dual locking brackets plus fire safety release pin option. Heavy angular design resists bolt cutters. 3.5 inches between window bars.

Baby safety, child safety and home safety experts agree that children must be protected from falls from windows. John Sterling window guards are designed for safety and provide home security, too. Each year in the USA, over 15,000 children fall from open windows. Many die or suffer serious injuries from landing on concrete or other hard surfaces.

NOTE: Check with your local building inspection department for window guard requirements for your locality.

Childproofing windows with 1120, 1130 or 1170 series off-white John Sterling window guards is a must for multi-level homes, apartments, condos or homes where windows are close to the floor. John Sterling window guards have solid steel bars to add security to any window. For baby and child safety, install window guards on any window more than 12 feet above ground level, windows 2nd through 6th story, or at any level where a child could fall or climb through an open window. Window screens are not strong enough to keep children safe from window falls. Check local city codes prior to help you select the proper type of window guards to protect your children.

John Sterling Security and Child Safety Window Guard 1170 Series. Sterling Max Guard for Maximum Window Security. This Lift Off Escape Type Window Guard Features:

Use to Protect Most Windows: Double hung, sliders or casement windows.
Window Locations: Sleeping and non-sleeping rooms.
Bar Spacing: 3.5 inches. Exceeds 4 inch recommended safety standard for child window bars.
Bar Options: 3 bar , 5 bar, 5 bar long, 5 bar extra long, 7 bar.
Width Options: 24-42 inches (3 bar, 5 bar and 7 bar), 40-60 inches (5 bar long) and 58 to 78 inches (5 bar extra long).
Angular Flat Bar Design : Resists bolt cutters.
Mounting Options: Horizontal or vertical installations.
Stackable: Fit units side by side or vertical stack to fit window width or height.
Standard Color: Off White.
Construction: Solid steel window guards
Strength Test : Tested to withstand 150 lb. force at maximum extended width.
Operational Type: Lift off emergency exit window guards.
Unique Hinge Brackets : Allow security guard to lift off when open. Mounting screws are protected when window guard is closed.
4 Mounting Brackets Per Guard: Engage locking brackets simultaneously at top and bottom of guard. Unique anti-lift brackets can be mounted at top or bottom to hold window guard securely to both brackets with only one fire safety pin or padlock. Release guard by lifting slightly before swinging open.
One Lock Guard Per Guard: Protects against bolt cutter.
One Anti-Lift Latch Per Guard
Fire Safety Release Pin: Option instead of padlock for security. Mounts high on side of window guard out of reach of small children. Requires moderate force to remove.
Manufacturer: John Sterling Corporation, Richmond IL.
Made in USA.
Manufacturers Limited Warranty: Replacement of any part found defective in material or workmanship. Warranty is limited strictly to replacement of the defective part and does not cover any other expenses which may arise in the use or replacement of such part.
Mounting Options: Recessed or Surface Mount. Surface Mount burglar bar installation is easier as screws are easier to drive and less accessible to intruders on the outside.
Tamper Resistant: Option to drill out the Phillips cross slots in each screw to make tamper resistant.
Installation Options: Double hung, Sliders or Casement Windows only. Mount security bars over both upper and lower window sashes or over lower sash only as desired.

Sterling Child and Window Security Guards when properly installed will tend to discourage illegal intruders. But no protection is absolute. With enough time and tools a determined criminal can defeat any barrier.

Installation Requirements:

Install only in solid, non-rotting window tracks. Expand Guard to fit tightly into outside window track.
Temporarily support Guard in level position NO MORE THAN 4 inches from sill to upper half of bottom bar . Mark location of holes on each side. Remove Guard and drill 5/32" diameter. pilot holes 1 inch deep.
Re-position Guard and mount with #10 one way screws (included.)
Raise the inner window NO MORE THAN 4 inches above the lower half of the top bar. Position "L" shaped stops so as to limit the opening above the Window Guard to a maximum of 4 inches.