1/2 Inch Brass Ball Valve with Security System Alarm Interface.
Use this WaterCopelectric water valve with actuator with or without a Water Hound moisture sensor. This automatic water valveshut off device allows you to shut off the main water line with a push of a button. To open the water valve, simply push the green button. The WaterCop actuator has a built in I/O port with an RJ45 connection. To connect the Watercop device to the Remote Water Control Wall Switch, use Cat 5 cable. Or connect the I/O port to a security system control box.
Included: One .5 inch brass ball valve with platform, one Watercop motorized 115VAC actuator with I/O port and RJ45 connection. Made in USA.
Not Included: No moisture sensors or low temperature sensors are included. Note: When used with a Water Hound moisture sensor, the Water Cop actuator is an automatic water valve shut off device.
DynaQuip - WaterCop 1/2 Inch Valve Platform With Shut-Off Handle .5 Inch Brass Water Valve for WaterCop Install this WaterCop ready water valve with platform on which to mount a Water Cop when a home...
DynaQuip - Remote WaterShut Off Switch for Water Cop RS100 Control Water Valve by Touching a Button Add this water control remote switch near an exit door, security system control box or where you...
DynaQuip - Single Probe Water Hound Sensor, No Battery or Adapter Use Moisture Alarm Alone or With Watercop Protect your home from water damage with a water alarm that uses a moisture sensor.
![[Home]](/shp2/data/menus/Non-framed_6/SHP_NF_m1_i0.png){kind=small}
