WaterCop 1 1/4 In. Lead Free Ball Valve, 3 Sensors

California and Vermont home owners, apartment complexes, commercial buildings, etc. can now install this MADE IN USA WaterCop water damage prevention system! The new WaterCopLow lead valve complies with CA AB1953 and VT S.152 Ultra-Low Lead Law.

This low lead brass ball valve in the WaterCop Sergeant basic automatic water protection package meets the low lead standards for California and Vermont water valves.Get both water damage protection and the knowledge your exposure to lead in water is minimal. Use for whole house protection with installation on your main water pipe or zone a larger home, apartment building or business with several units, each set with different codes. (You don't want to turn off your neighbor's water if your WaterCop is turned off by a moisture sensor alarm!)

The water damage protection package has a Water Cop valve electric actuator that uses 110VAC, a 1 1/4 inch low lead brass ball valve with platform (WaterCop ready) and three single probe moisture sensors , that detect water and sound a local water alarm . Use the security system alarm interface on the electric ball valve actuator to connect this water damage protection system to a monitored home security system.

Protection against water damage in homes, condominiums and businesses means lower insurance premiums from many companies. Slow and fast leaks from toilets, washing machines, dishwashers, etc. damage estimates are often in the tens of thousands. Install this WaterCop with electric water valve and place moisture sensors in as many places as you wish or can afford. Included in this package are three water sensor alarms that operate either on AA batteries or on optional AC adapters (not included).

The Water Cop electric water valve responds to radio signals from these water alarms placed under or near water using appliances and shuts off the water to that zone or the entire building.

Contents: Water Cop Automatic Actuator with 1.25 Inch Full Port Brass Ball Valve that is Low Lead, meeting California and Vermont water valve requirements, a Home Security Interface (on the actuator) and three (3) Single Probe Water Hound Moisture Sensors. The built-in I/O port has an RJ45 connection. The WaterCop data sheet actually calls this both low lead and no lead.