Automatic Water Valve for Damage Control
Protection against water damage for homes or businesses means installing water moisture sensors and automatic water shut off devices. If you have a newer home and larger water pipes into your home, choose the Water Cop automatic water valve actuator with security alarm interface and a 1.25 Inch brass ball valve. This kit, sometimes called the "Sergeant" includes 3 moisture sensors that signal via radio to the actuator and shut off water flow almost instantly.
- Heavy Duty Water Cop Automatic Actuator
- 1 1/4 Inch Brass Ball Valve
- Built In Home Security Interface: I/O port with RJ45 connection
- Three (3) Single Probe Water Hound Moisture Sensors
|
| Water Cop Installation Locations: |
After existing main water line shut off valve or inside building if shut-off is outside. Maximum working water pressure is 125 PSIG. |
| Installation Time: |
Professional installation: one to two hours+. For new dwellings, install WaterCop Ready Water Valves and add WaterCop later. |
| WaterCop Power Requirements: |
120VAC electrical outlet. outlet. |
| Water Cop Security System Option: |
Low voltage interface terminal direct wires to home security alarm system or home automation control panel. For security systems with auxiliary outputs, contact security system dealer/installer for interface installation. |
WaterHounds:
- Local Water Alarm for Moisture
- Transmit Signals for to Activate Your WaterCop.
- For Maximum Water Leak Detection, Place Water Hound Water Alarm Near Every Water Using Appliance.
|
- Power Source: 2 AA Batteries (Not Included) or AC Power Adapter (Not Included)
- Operational Modes: WaterCop Activation Device Plus Independent Moisture Sensing Water Alarm
- Alarm Intensity: Similar to Watch Alarm or Pager
- Single Probe: One 9.75 Ft. Cord and One Transmitter/Alarm
- Twin Probe: Two 9.75 Ft. Cords and One Transmitter/Alarm
- Operational Distance from WaterCop: Up to 200 Feet. Frequency goes thru sheetrock and concrete. Significant metal construction may reduce range. Suggestion: test WaterCop range for water leak detection before installation.
|
| Starter Kit Contents: |
WaterCop and Three Water Hounds (Single Probe) to monitor washing machine, hot water heater, refrigerator or dishwasher. |
| Additional Sensors Available: |
WaterCop supports an unlimited number of WaterHounds for water leak detection. |
| Additional WaterCop Valves: |
"Zoned" protection for large houses or buildings. |
| NOTE to Contractors: Install WaterCop Ready Water Valves. |
Inexpensive. Add WaterCop later with a few screws. |
| Leak Detection Sensor Specifics: |
- Sensor probe contacts: gold-plated for reliability.
- Frequency; 400 - 500 MHz. At trade shows, there was no interference with other FM frequencies.
- Change communication codes: Dip switches on sensors and receivers. 4 switches; 48 possible codes means 48 possible zones with additional WaterCop valves.
- Battery Life: Alkaline about 1 year. Titanium, about 2 years.
- Low battery: units "chirp."
|
| Notes: |
- Manual override for closed valve. If power fails, unscrew and remove water valve actuator and turn valve stem with wrench 1/4 turn.
- Pair an Alarm Ready WaterCop with TemperatureGuard Plus. Click here for more information. Units monitor water valve closure, power status, and temperature changes via phone or page alerts.
|
| Warranty: |
One Year Manufacturer's Warranty. |
HTML
PDF