TWO (2) Wagan EA2045 YELLOW BAR AUTO JUMPER with AC Adapters
12 Volt Portable Wagan Auto Jumpers:2 Units Jump Start a Car with a Weak 12 Volt Battery. Plug into 12V Accessory Outlet. Start Car with Closed Hood, No Jumper Cables.
Plug the 12V portable Auto Jumper into the car's 12V accessory outlet. Usually in 10 minutes, the car starts. Auto Jumper has an internal powerful Ni-Cad battery that charges via 12V accessory outlet or 120VAC with adapter.
Three Auto Jumper Uses:
Maintain memory settings of clock, radio and computer system when car battery is changed.
Use as converter indoors: plug in 12V accessories. Then plug AC adapter into 120VAC outlet. .
Start car with weak 12V battery while safely seated in your car.
Auto Jumper Features:
Most cars start in 10 minutes after plugging in the Auto Jumper. Note: Not for use with a completely discharged battery.
Powerful Ni-Cad battery (5Amps, 14.5V)
Built-in trickle charge protection
Operating temperature: -5°F to 120°F
Storage temperature: 32°F to 110°F
Or use Auto Jumper as a 12V power source:
12V power socket located on side of unit. A positive (+) center pin required for use with Auto Jumper
Or use with DC to DC adapter (not included).
Operate DC accessories such as 12V radios, cellular phones, PDAs, Camcorder, 3W CD Audio Player and more.
How to Recharge Auto Jumper:
Start auto engine. Plug self-charging Auto Jumper into 12V accessory plug. Recharge takes 30 to 60 minutes with engine running.
Use the included AC adapter. Charge for 4 - 6 hours.
Self Charge Auto Jump Starter comes fully charged. Note: Initial charge required before use.
Every 12 months, recharge unit regardless of usage. Each unit recharges minimum of 500 times.
Built-in trickle charge protection
Fuse protection regulates discharge and recharge of this portable jump starter.
Technical Information:
Power: 19.8 Watts
Battery Size/Type: 1500mAh, Sub-c Ni-Cad
Fuse size in socket: 20A
Voltage output: 13.2V DC
120VAC adapter Included for recharging Auto Jump Starter.
HTML
PDF
