Water Leak Detector with Two Probes and Low Db Alarm Indicates Leak Location
MADE IN USA. This moisture sensor with alarm was made to use with the WaterCop (not included) and can protect two water using appliances like a water heater and a washing machine using the same water alarm , the WaterHound . This twin probe water sensor by DynaQuip (no AC adapter) Water Hound water sensor sounds an alarm intensity similar to a watch alarm or a pager beep when the probe detects moisture when either of the probes comes in contact with water or moisture. This Water Houndalso transmits a radio signal to the Watercop automatic water valve actuator (if installed) and shuts the valve to turn off water. Note: Safe Homes does not recommend using this unit as a local stand-alone alarm as it is not loud. It is meant to work with the Water Cop unit.
One twin probe water alarm protects two adjacent water using appliances.
Monitor specific leak prone areas within the home for unwanted and potentially damaging water accumulation of internal flooding.
Moisture sensor alarms feature a robust 418MHz radio transmitter chipset with up to a 200 foot operating range.
User adjustable digital security codes.
Operate on either two (2) AA batteries or an optional AC power adapter. Note: Current configuration does NOT allow for batteries to back up AC Adapter.
Low battery warning chirp.
Each probe has 6 foot sensor cord. Twin Probe Sensor perfect for under two adjacent units (ex. washer and water heater).
