Temperature, Humidity and Power Alert Gives You Remote Access to Check All 3
Say "good-bye" to remote monitoring fees! The Temperature Guard has a temperature alert , humidity alert and power alert phones or pages numbers you program to sound alerts. The Microtechnologies' Temperature Guard with Humidity Alert is affordable remote monitor . S tand alone remote monitor has a power failure alarm, an adjustable temperature
monitor and an adjustable humidity monitor built inside. Protect homes or businesses without spending a fortune. A
must for climates where heat and humidity require air conditioning.
Protect against high temperatures due to air conditioning failure, low temperatures due to furnace failure and damage due to power loss with one remote monitor device. The Temperature Guard with Humidity, Power and Temperature Sensors, the VM 500-3HT phones or pages four telephones or pagers to sound an alert.
Inexpensive insurance against humidity and temperature damage. Examples for Use: Florida second homes, computer rooms and green houses. This remote temperature monitor, power monitor, and humidity monitor lets you choose an acceptable humidity range and a temperature range. You remotely access the monitor via telephone to check temperature, humidity and power status when you choose .
Dial out power alerts: Be notified if power failure lasts over five (5) minutes. Stops calling after power resumes or PIN entered.
Dial- out temperature alerts : when temperature exceeds or is below limits you set.
Dial-out humidity alerts: when humidity levels exceed or are below levels you set.
Thermometer range: measures temperatures within a range of 32° F to 125° F. accuracy: 2° .
Programmable temperature limits: 35° F to 125° . Note: Limit is 3° F above freezing to avoid damage due to freezing temperatures
Humidity sensor measures within a sensing range of 0% and 90%RH.
Programmable humidity limits: 0% to 99%:accuracy 5%
Programmable dial-outs: choose four 20 digit phone or pager numbers.
Remote dial-in access: check power, temperature, and humidity any time.
Integrated voice tells you the temperature and makes it easy to program.
Record personal identification message: use your phone. Message can be 10 seconds long.
Answering machine friendly: Works on lines with answering machines.
No monthly monitoring charges: all you need is electricity and an active land-based telephone line.
Included components: Plug-in wall transformer, splitter and telephone extension cable.
Note: For use with digital phones, purchase a DSL filter. A DSL filter is an analog low-pass filter installed between analog devices (such as telephones or analog modems) and a standard telephone line, in order to prevent interference between such devices and a DSL service operating on the same line.
Note: All
Temperature Guard products require an analog phone line. Most digital
phone system manufacturers offer digital to analog converters that you
can use to connect a Temperature Guard to your digital phone system.Temperature Guard products can share an analog fax line. See the specific model's manual for details
Battery back-up: 4 hours.
Approvals: FCC Approved and Registered.
Enclosure Dimensions: 5 1/2" x 5" x 2 1/2".
We now stock units with 30 hour battery back-ups. Or later choose this modification from the manufacturer.
Warranty: One year limited manufacturer's warranty.
HTML
PDF
