Add a smoke detector sensor to your Sensaphone IMS-4000 Host or Node (not included) as a smoke monitorfor indoor environments. This Sensaphone 4000 accessory can be installed near the IMS-4000 or in a remote location.
The IMS-4862 Smoke Detector Sensor connects only to the IMS-4000 Host or Node to detect smoke indoors. Attach the smoke sensor to a wall or ceiling (hardware not included). The Smoke Detector Sensor includes an attached 7' cable with an RJ-45 plug on the end. If the sensor is close to the IMS-4000 Host or Node, plug the sensor directly to an IMS environmental input. If the cable is too short, use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input.
