This is another temperature sensor for the IMS products designed for very low temperatures. The external probe can be mounted inside of an ultra low freezer and monitor down -85 Deg C.
The IMS-4814 Ultra Low Temperature Sensor is designed to connect to the IMS-4000 Host or Node and monitor temperatures in refrigerators or freezers. The electrical connection between the sensor and IMS-4000 is made via the attached RJ-45 patch cable. The sensor probe may be secured inside equipment using the included clamp or it may be hung using tie wraps. Do not install the black plastic enclosure inside of a refrigerator or freezer.
The Ultra Low Temperature Sensor comes with an attached 7' cable with an RJ-45 plug on the end and a weatherproof probe with 12' of cable. If the sensor installation is close to the IMS-4000 Host or Node, you can plug it directly into an IMS environmental input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure.
For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input.
Temperature Sensor IMS-4814 Specifications:
Must be used with a Sensaphone.
Accurate to ± 3°F.
Humidity: 5-90% RH.
Sensor type: Sealed thermistor probe.
Connector: RJ-45.
Housing: Black plastic.
Compatible with Sensaphone models: IMS-4000, IMS-1000, and Nodes.
Temperature Range: -122 to 53°F.
Package Contents: 1 temperature sensor, 2 plastic drywall anchors, 2 #6 metal tapping screws, a 1/16" hex key.
HTML
PDF
