Wireless Monitor System with Analog Capability Uses Up to 4 Wireless Sensors
Sensaphone 2800 with clear dooris a remote monitor for critical conditions at remote sites and does not require running wires. Monitor temperature, humidity and more at greenhouses, freezers, barns, coolers, etc. Wireless sensor technology with full analog capability means real time values can be monitored. The Sensaphone 2800 Model FGD-2800-CD allows you the ability to read sensor status from wireless sensors. Monitor actual temperatures, real tank levels, flow rates and more.
Use up to four Sensaphone wireless sensors with the 2800. A variety of wireless sensors types are available to choose from, including:
Temperature
Humidity
Power Failure
Motion Detector
Water on Floor
Sensaphone 2800 Wireless Monitoring System Features:
Wireless sensors.
Two Wireless Interface modules. These allow you to connect to existing equipment or sensors and transmit their status back to the 2800 wirelessly. There is a Dry Contact wireless module and a 4-20mA wireless module. The 4-20mA wireless module even provides battery backed 24 VDC loop power for your transducer.
Built-in Power failure, Sound level
Inputs 4 hard wired universal, 4 wirelesses
Outputs 1 relay (manual or automatic control)
Notification 8 custom voice phone calls
Where You Need It Also included on the 2800 are four traditional, hard-wired sensor inputs. These are Sensaphone Universal Inputs that can be used with temperature sensors, dry contact sensors, and even 4-20mA transducers. So, when you have monitoring requirements near the 2800, just wire them in. When wiring is inconvenient or further away, just sticks the wireless sensors where you need them. The wireless sensors will operate up to 300 feet line-of-site away from the 2800. Not far enough? Just add a wireless repeater to go farther. The repeater can be located up to 4000 feet line-of-site from the 2800. Then, one or more sensors can be located up to 300 feet line-of-site from the repeater.
Notification Just like the other Sensaphone products, the 2800 uses the reliability of a standard phone line to make phone calls to the appropriate personnel to announce alarm conditions. Each monitoring condition, both wired and wireless, can have a custom voice message attached to it. Each message is recorded in your own voice for easy alarm identification. Alarm notification will repeat out to eight people until acknowledged.
Applications Use the 2800 to monitor multiple greenhouses without wires, multiple barns, coolers, freezers, or a wide variety of remote equipment. The new Sensaphone 2800 can be used anywhere you would use our other Sensaphone products. The 2800 just makes installation and expansion faster and easier. Extend your reach and monitor your critical remote locations with the new Sensaphone 2800.
PDF
