Install this white flush mount (recessed) combination carbon monoxide monitorand propane gasalarmin your motorhome or RV. This Safe-T-Alert gas alarm , an essential RV part , needs testing several times a month. Replace your CCI LP gas alarmnear your propane furnace or propane stove for double protection against both carbon monoxide leaks and against fires or explosions from propane leaks.
Fits the CCI LP Gas Alarm Cut Out (7770 series) for Flush Mount Models. (In other words, when installed, this unit does not protrude from the wall: the sensor part of the unit fits inside the hole.)
Note: Some CCI units in Fleetwood or Winnebago RV's have two power leads. This dual carbon monoxide alarm and propane gas monitor unit has only one. Connect the red power lead to the coach power supply and cap or remove the other power lead. Use butt connectors to replace any unit with spade connections.
Safe-T-Alert 35 Series LP Gas Alarm Plus Propane Gas Alarm Features:
Meets 1/1/05 requirements set by RVIA for CO alarms and Propane Detectors.
Test/Reset Button - Mute alarm during ventilation. Tests both alarm functions with one touch.
Both alarms are fully operational during mute cycle and will re-alarm if hazardous conditions recur.
Both sensors continue to work during an alarm.
12 Volt - Hard Wired Model prevents accidental disconnection.
UL listed for Recreational Vehicles and Unconditioned Areas for both Carbon Monoxide and Propane/Natural Gas.
Built for the extreme RV environment.
UL listed for Recreational Vehicles and Unconditioned Areas.
Warranty: The Date Stamped on each Detector is the Date of Manufacture. Each unit has a 10 year shelf life. The Limited Warranty is 1 year and begins from the date of resale. Units have a 5 year life. Replace units after 5 years. Contact MTI directly for warranty related questions.
35 Series Operating Specifications:
UL Listing Propane - UL 1484 RV Gas Detectors
UL Listing Carbon Monoxide UL 2034 RV Carbon Monoxide Alarms
ULC Listing & CSA 6.19-01
Supply and Current Draw 12 vDC 108 mA @ 12 vDC
Operational Voltage: 12 Volt +/- 15% - Low voltage power warning alarm @ 7 volts
Case Size - 6.375"W x 2.875"H x 1.25"D - Fits Safe-T-Alert Model 30-442 Cut Out : 5 3/8" x 1 7/8.
Fits Safe-T-Alert Model 30-442 Cut Out and CCI LP Gas Alarm Cut Out for Flush Mount Models.
