Each of these 6 ASE30 hard case smoke hoods can be mounted near fire escapes , fire alarms or fire extinguishers . For use at or below the 19th floor of a building. Not recommended for 20th floor or above.
Break the seal on the plastic box, remove the fire hood from the vacuum sealed pouch, put it over your head and tighten the head belt. Note: Never Open The Smoke Hood Before Needing to Use for An
Escape. Once the Clear Package Seal is Broken, the Life-Saving Chemicals
You are now able to use this single use respirator to protect against smoke inhalation and many other toxic gases. This emergency smoke hood is guaranteed to provide up to 30 minutes of breathable air: enough time to escape any burning building, home, hotel, office or school. Smoke inhalation (SI) is the number one cause of fire deaths. Each unit fits an adult or a child. NOTE: TSA regulations about
carrying a smoke hood on board a commercial airliner vary. We understand
TSA may not permit a passenger to take this unit on board. Warranty: 5.5 years after date of manufacture. All units will have a minimum warranty of 48 months.
With no smoke mask, you have less than 60 seconds to escape the deadly effects of Smoke Inhalation (SI). Safe Escape protects your head completely from toxic smoke and falling hot ash.
Safe Escape Fire Escape Smoke Hood Components:
Oversized Hood: Complete head coverage including hair, facial hair and glasses.
Extra Large Clear Vision Window: Clear view for wearer reduces chances of claustrophobia.
High Capacity Filter Cartridge: Stainless steel cartridge shell. Allows up to 30 minutes of filtered safe air.
Elastomeric cotton neck dam seals out polluted air. Adjustable two-point belt button helps fit mask securely to face.
Inhalation resistance less than 800 Pa; Exhalation resistance less than300 Pa.
Penetration coefficient of oil mist less than 5 per cent
Stay calm. Open the packing case. Remove the Safe Escape Smoke Hood, toxin prevention mask.
Move 2 red rubber stoppers in the front of the toxin filtration tank. Push out the tank towards the front of the mask.
Pull the mask over your head. Pull to cover neck. Place toxin filtration tank in front of your nose.
Tighten head belt. Pull out and back for snug fit.
Try to breathe normally. Choose the safest route out of the building.
The Safe Escape fire safety hood is endorsed by many fire departments. Live testing was done in live testing in real fire training facilities. On May 23rd, 2005, the local affiliate of NBC News / KSDK in St. Louis, Missouri and Art Holliday, Executive Producer, aired an in-depth Special Report on this smoke fire safety device showing how it can SAVE LIVES. A local fire department also used this at their training facility in a live fire reenactment.
Single use, disposable unit.
Breathe normally. No nose clips, no can to breathe through.
Secure fit in seconds.
Easy Application: Slip on like a Halloween Mask.
Designed for ages 2 years and older.
Respiratory protection for emergency preparedness.
Use respirator with 17% or more oxygen present.
Storage Conditions: Well ventilated, dry area with temperatures 0° C to 40° C .
FREE REPLACEMENT should you use it in an actual Fire or Smoke occurrence during the 5 years
Head Hood and Mask produced with Flammable-Resisting Aluminum Foil cloth.
Withstands temperatures of 1400° F (800° C).
Actual Flame Tested and Radiant Heat Tested up to 1400° F.
Protects the head from flame, thermal radiation and dropping dust from fire.
Form Fitting Elastic neck band keeps out foreign matter.
Dimensions of Sealed Plastic Container: 4.25 x 5.25 x 8.25 inches.
Portable for easy travel.
SAFETY CODE COMPLIANT:
Smoke and Fire safety Hood Mask conforms with USFA-FEMA standards.
European Standard EN 403.
Australian and New Zealand Standard AS/NZS 1716:1994.
Thailand Disaster Prevention Department of the Interior Ministry.
Japanese Standard 248.
Soft Case Travel Unit (ASE30), Dimensions: 4 x 5.5 x 7 inches. Orange smooth vinyl case with top zipper with woven nylon carrying strap. Clear plastic inserts front and back protect use instructions and specifications.
Hard Case for Mounting (Purify Air 30M, ASE30-HU), Dimensions: 5.5 x 9 x 4.5 inches.
Warranty: 5.5 years after date of manufacture. All units will have a minimum warranty of 48 months.