Give Dogs and Cats Healthier Drinking Water with Fresh Filtered Water
from an Automatic Pet Fountain
Encourage cats and dogs to drink more water with this filtered pet drinking fountain. The clean, filtered pet waterersatisfies your pets' urge for running water and keeps them healthier. The Lentek Pet Fountain is superior to a dog water bowl or cat water bowl because of the continuous aeration as the water is recirculated and filtered. The water bowl reservoir holds the equivalent of 6 standard water bowls. That means your pet can enjoy fresh water day or night without you worrying about the pet water bowl going dry. The charcoal filter removes bad tastes and odors, too.
Lentek Pet Water Fountain Features:
Adjustable water circulation flow: maximum or minimum flow.
Directional spigot: aim water up or parallel to the top of the water bowl.
Removable splash guard island: suction cups to fountain reservois to eliminate water noise.
Removable Lid: to water tank resembling a toilet tank.
Charcoal filter: open packet and sprinkle into holder below the directional spigot. Note: replacement charcoal available through aquarium supply stores. Rinse well before using to remove any dust.
Water Bottle: Uses any 2-liter soda bottle (Not Included) after removingall loose plastic retaining rings and rinsing thoroughly with clean water. Or use the Lentek Pet Fountain Water Bottle (Sold separately)
Water Supply with a 2 Liter Bottle: equivalent to six bowls of water circulating down into the drinking bowl area.
No Glide Casters: on bottom of water bowl base.
UL listed power adapter included (12V 500mA) with 6 foot cord.
Dimensions: Assembled length, front to back: 16.5 inches. Width: 7 inches at widest. Length of water bowl: 7 inches. Depth of water bowl: 2.75 inches. Width of water bowl: tapers from 5.75 inches to 6 inches resembling a toilet bowl.
Warranty: One year by Lentek.
Assembly Instructions for Pet Waterer:
Connect bottle holder to fountain by placing the over hanging lip onto the back of the fountain
Place the splashguard into the fountain reservois using the suction cup on the bottom - this is to eliminate water noise.
Snap in the replaceable charcoal water filter just below the directional spout.
Plug in the AC adapter on the lower left side of the base.
Fill a 2 liter bottle with clean water after removing all loose plastic retaining rings from the bottle.
Place the 2 liter bottle upside down onto the detachable base.
Set the water circulation flow using the silver "flush handle" on the face. Min or Max for water flow.
Connect the AC adapter to power
Connect the spigot up or down to direct water flow.
Move splash guard as needed to be directly under the water flow.
Adjust water flow with filver handle as needed.
Note: Replace charcoal water bowl filters once a month. Unplug and remove bottle and bowl for cleaning as needed.
HTML
PDF
