Window Safety Guards | Safe Home Products, Inc.

Not sure which Window Guard is for you? Try our Selection Wizard

Keep Children from Falling Out of Open Windows

Install window guards to keep children and pets safe. Childproofing is easy with these removable egress child safety window guard units by Guardian Angel. Easily installed, the 2335-44V is a window guard designed to protect slider windows and casement windows in homes, day care centers and apartment buildings.

Baby safety, child safety and home safety experts agree that children must be protected from falls from windows. Guardian Angel window guards are egress (escape) window guards designed for safety not for home security. In an emergency, an adult or older child pushes button locks near the mounting bars to remove guards. Window guards remove easily from inside or outside a window. Each year in the USA, over 15,000 children fall from open windows. Many die or suffer serious injuries or death from landing on concrete or other hard surfaces.

Childproofing windows with Guardian Angel window guards is a must for multi-level homes or homes where windows are close to the floor. Guardian Angel II window guards are made from strong, steel tubing powder coated with a durable, lead-free white paint. For baby and child safety, install window guards on any window more than 12 feet above ground level, windows 2nd through 6th story, or at any level where a child could fall or climb through an open window. Window screens are not strong enough to keep children safe from window falls.

Guardian Angel Window Guard Features:

Low-profile appearance.
Leader in window fall prevention.
Tested to withstand up to 150 pounds of pressure in locked position.
Quick release buttons for fast window guard removal in emergencies. Guards have 2 or 4 emergency release buttons.
No tools or excessive force are needed to remove Guardian Angel windowguards.
Remove window guards from inside or outside the window.
Bar spacing of 3 7/8" : exceeds 4" to 5" safety standards.
Horizontal guard height: 21 3/8", about 3" higher than most brands.
Side posts anchor with 2" sheet metal screws into solid stud or frame mats..
Six stock sizes with 4 bars fit most horizontal opening (single and double hung) windows.
Combinations of 3, 4 or 5 bar vertical mount units protect openings of vertical windows like sliders and casements.
Conforms to American Society for Testing and Material standards (ASTM F2090-01A) and recognized by the U.S. Consumer Products and Safety Commission.
Conforms to most local fire and building codes for egress type window guards.
Meets Massachusetts building codes: 780CMR 3603.14.2.2 and 780 CMR 1010.4.
Made in USA.
Lifetime guarantee by manufacturer.
For large quantity orders, allow three weeks for delivery. Express shipping available depending upon inventory.

How to measure for child safety window guards:

Identify window type. VERTICAL: The window opens by sliding a panel to the side in a track, cranking a panel out or pulling or pushing a panel of glass in or out. Guards for vertical windows are mounted like prison bars to protect either the entire window opening or the entire window. SINGLE HUNG : The lower window panel moves up and down in a track. DOUBLE HUNG : Both the upper and the lower window panels move up and down, each in its own track. For Single or Double hung windows, customers usually protect only the window opening. This is done with a single guard with a window stop to keep the window from opening above the top of the mounting bar. To protect both panes, vertical guards can be mounted side by side or stacked like a ladder.
Decide where to mount window guards: Inside the window frame or extending beyond the frame with mounting bars in the studs.
Use a tape measure to measure interior width of the window frame or beyond the frame for stud mounting.
Push the bottom window panel up until it stops or push the panel to the side to measure the entire physical opening .
Treat a double or single hung window like a vertical if you wish to cover the entire window. Send us e-mail with the dimensions and we'll assist you.
Compare measurements with chart below. Guards "telescope" like curtain rods, locking into the side or top mounting bars. Guardian Angel II window guards are not spring-loaded.
Remember: horizontal and vertical window guards differ . Mounts for vertical guards are designed to butt together so that only 4 inches are between protective bars. The mounts are at the top and bottom of the window interior, often between the screen and the window glass. Mounts for horizontal guards are mounted on the sides of the window's bottom pane: there is a 4 inch space between the first bar and the bottom of the window. and the screen is usually on the outside of the window pane.

For unusual windows or for larger quantities of guards, fax specs or drawings to SafeHomeProducts.com.

NOTES: Window guards do NOT substitute for adequate supervision. Child safety requires mature persons establishing and supervising children in a safe environment.

Window guards MUST protect the entire OPEN portion of window or panel for baby safety.
No space greater than 4 inches is allowed according to ASTM PS 120. (This is why double and single hung windows can not be safely mounting vertically in sliders, casements, and push-outs or pull-in windows.)
Use window stops (such as Super Stoppers) in conjunction with Window Guards for windows that open more than 22 inches.

Guardian Angel Window Guard,Vertical,23-35 in,4BAR