Protect children and pets from falls from windows. Install child safety window guards in homes, day care centers and apartments. This is an economical package of four (4) 1417-44H Guardian Angel Window Guards for Horizontal or Vertical Installation in Windows. Made in USA>
Guardian Angel II window guards are made from strong, steel tubing powder coated with a durable, lead-free white paint. For baby and child safety, install window guards on any window more than 12 feet above ground level, windows 2nd through 6th story, or at any level where a child could fall or climb through an open window. Window screens are not strong enough to keep children safe from window falls.
Tested to withstand up to 150 pounds of pressure in locked position.
Quick release buttons for fast window guard removal in emergencies. Guards have 4 emergency release buttons.
No tools or excessive force are needed to remove Guardian Angel windowguards.
Remove window guards from inside or outside the window.
Bar spacing of 3 7/8" : exceeds 4" to 5" safety standards.
Horizontal guard height: 21 3/8", about 3" higher than most brands.
Side posts anchor with 2" sheet metal screws into solid stud or frame mats..
Conforms to American Society for Testing and Material standards (ASTM F2090-01A) and recognized by the U.S. Consumer Products and Safety Commission.
Conforms to most local fire and building codes for egress type window guards.
Meets Massachusetts building codes: 780CMR 3603.14.2.2 and 780 CMR 1010.4.
Made in USA.
Lifetime guarantee by manufacturer.
For large quantity orders, allow three weeks for delivery. Express shipping available depending upon inventory.
How to measure for child safety window guards:
Identify window type. VERTICAL: The window opens by sliding a panel to the side in a track, cranking a panel out or pulling or pushing a panel of glass in or out. Guards for vertical windows are mounted like prison bars to protect either the entire window opening or the entire window. SINGLE HUNG : The lower window panel moves up and down in a track. DOUBLE HUNG : Both the upper and the lower window panels move up and down, each in its own track. For Single or Double hung windows, customers usually protect only the window opening. This is done with a single guard with a window stop to keep the window from opening above the top of the mounting bar. To protect both panes, vertical guards can be mounted side by side or stacked like a ladder.
Decide where to mount window guards: Inside the window frame or extending beyond the frame with mounting bars in the studs.
Use a tape measure to measure interior width of the window frame or beyond the frame for stud mounting.
Push the bottom window panel up until it stops or push the panel to the side to measure the entire physical opening .
Treat a double or single hung window like a vertical if you wish to cover the entire window. Send us e-mail with the dimensions and we'll assist you.
Compare measurements with chart below. Guards "telescope" like curtain rods, locking into the side or top mounting bars. Guardian Angel II window guards are not spring-loaded.
For unusual windows or for larger quantities of guards, fax specs or drawings to SafeHomeProducts.com.
NOTES: Window guards do NOT substitute for adequate supervision. Child safety requires mature persons establishing and supervising children in a safe environment.
Window guards MUST protect the entire OPEN portion of window or panel for baby safety.
No space greater than 4 inches is allowed according to ASTM PS 120. (This is why double and single hung windows can not be safely mounting vertically in sliders, casements, and push-outs or pull-in windows.)
Use window stops in conjunction with Window Guards for windows that open more than 22 inches.
