Automatic Water Alarm System for 1/2 Inch Water Pipes with Ball Valve, Sensor and Alarm
For water damage protection in your home, install this new Floodstop automatic water shut off valve system with water alarm with has a 1/2 inch pipe connection. This is a full port motorized water valve that uses a 1/2 inch threaded pipe for connecting to a water using appliance. The full port water valve meets the Vermont and California requirements for lead free water valves for drinking water. Use on smaller water heaters, mid-sized water conditioners, water softeners and any application where you want to connect to your home's internal 1/2 inch piping.
Stop water damage before your basement floods or your ceilings or walls are damaged. This automatic water valve with moisture alarm stops water damage by shutting off water into your water heater and sounding an alarm.
Floodstop System has a water alarm combined with automatic water shut off valvefor 1/2 inch water pipe applications. Easily install the Flood Stop 1/2 Inch Valve NPT water alarm and automatic water shut off unit.
Each water appliance needs protection. Know about the small water leaks before flooding occurs: attach the output contacts to your home security system. Avoid home or condo insurance premiums increasing due to costly insurance claims. Avoid the inconvenience of home repairs due to water damage.
FloodStop Water Heater Alarm and Shut-Off Valve Features:
Easily Installs in 15 minutes.
Water Sensitivity Control.
AC with Battery Back-Up for Controller.
Stops Water Flow into Water Conditioner, Water Heater, etc. When Leaks Are Detected.
Sounds a Loud 87 db Alarm Alert.
Other Household Water Devices Remain Operational
Output Contacts for Security Systems, Home Automation or Auto-dialer System.
Solid Brass Full Port Motorized Ball Valve.
The full port water valve meets the Vermont and California requirements for lead free water valves for drinking water.
Double Sided Water Leak Sensor.
Add Additional Sensors as Desired.
Use on any 1/2 Inch Water Pipe for Water Leak Protection
To install, connect valve to the cold water line to the water appliance. Mount the control unit. Place sensor(s) on floor. Plug power supply into an unswitched outlet. Note: electricity is used only when the sensor detects water.
NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. If no water is present and alarm sounds, place paper towel or cloth under sensor to "insulate" against floor dampness or metal of pan. When the paper or cloth gets wet, the sensor activates the shut-off and sounds the alarm.
How FloodStop (FS 1/2-NPT) Works:
The FloodStop valve installs between the water heater or water conditioner and its manual shutoff valve.
Water/leak sensor placement is at the water heater base.
Valve is open until water leak is detected
Water on the sensor signals the Floodstop controller which closes the valve and alarms.
Valve remains closed until system is reset and sensor is dry.
FloodStop (FS 1/2-NPT) Components:
Motorized full-port stainless steel ball valve in brass valve body lined with Teflon (1/2 inch NPT pipe threaded).
Control unit with battery backup (4 C batteries, not included).
AC power adaptor (or use 4 C Batteries as primary power source).
Water leak sensor.
Output contact wires (2).
Automatic Water Valve Shut Off Technical Specifications:
UL Listed Class 2 Wall Adaptor, 115AC/9VDC.
UPC listed, full port, motorized ball valve: CNC machined.
HTML
PDF
