Install this floodstopper to stop water damagebefore it really starts. This Floodstop System has a water alarm combined with automatic water shut off valve for water heater or other 3/4 inch water pipe. Easily install the Flood Stop 3/4 Inch Valve NPT water alarm and automatic water shut off unit. Each water heater needs protection. Slow water heater failure is more common. Know about the small water leaks before flooding occurs: attach the output contacts to your home security system. Avoid home or condo insurance premiums increasing due to costly insurance claims. Avoid the inconvenience of home repairs due to water damage.
FloodStop Water Heater Alarm and Shut-Off Valve Features:
Easily Installs in 15 minutes.
Water Sensitivity Control.
AC with Battery Back-Up for Controller.
Stops Water Flow into Water Heater When Leaks Are Detected.
Sounds a Loud 87 db Alarm Alert.
Other Household Water Devices Remain Operational
Output Contacts for Security Systems, Home Automation or Auto-dialer System.
Solid Brass Full Port Motorized Ball Valve.
Double Sided Water Leak Sensor.
Add Additional Sensors as Desired.
Use on any 3/4 Inch Water Pipe for Water Leak Protection
Water heaters are considered maintenance-free. Yet a failed water heater is the single most damaging water appliance in buildings. Slow leaks go unnoticed or water under pressure can blow off the bottom of the tank causing major damage quickly.
To install, connect valve to the cold water line to the water heater. Mount the control unit. Place sensor(s) on floor. Plug power supply into an unswitched outlet. Note: electricity is used only when the sensor detects water.
NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. If no water is present and alarm sounds, place paper towel or cloth under sensor to "insulate" against floor dampness or metal of pan. When the paper or cloth gets wet, the sensor activates the shut-off and sounds the alarm.
How FloodStop (FS 3/4-NPT) Works:
The FloodStop valve installs between the water heater and its manual shutoff valve.
Water/leak sensor placement is at the water heater base.
Valve is open until water leak is detected
Water on the sensor signals the Floodstop controller which closes the valve and alarms.
Valve remains closed until system is reset and sensor is dry.
FloodStop (FS 3/4-NPT) Components:
Motorized full-port stainless steel ball valve in brass valve body lined with Teflon (3/4 inch NPT pipe threaded).
Control unit with battery backup (4 C batteries, not included).
AC power adaptor (or use 4 C Batteries as primary power source).
Water leak sensor.
Output contact wires (2).
Automatic Water Valve Shut Off Technical Specifications:
UL Listed Class 2 Wall Adaptor, 115AC/9VDC.
UPC listed, full port, motorized ball valve: CNC machined.
Motor operates at 6VDC.
Rated 0-180 PSI. Max 250 PSI. Solid brass.
Signal outputs: 2 normally closed.
Alarm: beeping with mute button.
Water Heater Flood Stop Features:
For added water detection protection, add more sensors. Sensors plug into sensors, NOT the Control Box.
The 3/4 inch valve is 4.5 inches long.
Controller has reset and test buttons to test valve performance plus battery back up.
Easy to install, operate, and maintain.
No special tools needed for installation.
Designed for residential, condo and apartment dwellings.
Full port ball valve automatically shuts off water supply to water heater when water sensor/sensors get wet.
Power: 120VAC and/or battery backup (4 C batteries).
No wires to route throughout the home
Alarm: beeping with mute button.
Water Sensor: 1.5" X 7.5", double sided. Additional sensors may be added in series.
FloodStop Controller:
3 buttons: Mute, Close Valve and Open Valve.
Water sensitivity adjustment. Clockwise: less sensitive. Counter clockwise: More sensitive.
4-pin connection to valve/sensor connector.
Outputs: Normally closed. Contacts for any device that can utilize them, like auto phone dialers, alarm systems, X10 home automations devices.
Controller Extension Wire for FloodStop Water Alarm and Automatic Water Valve Shut-Off Controllers Use this Flood Stop controller extension wire to install a FloodStop controller unit up to 11.5 feet...