FloodStop 3/4 in Valve Water Heater Shutoff COMPRESSION
Prevent Damage from Leaking Water Heaters
Costly water damagefrom leaking or failed water heaters cost thousands of dollars. Keep water damage to a minimum with a water heater Floodstop . This automatic water valve shuts off water into a water heater and sounds a loud 87 decibel water alarm. This compression fitting Flood Stop features a 3/4 inch water valve and can be used on all 3/4 inch copper pipe applications.
A homeowner or plumber can quickly install this unit in 15 minutes or less. The Floodstop for water heaters features a security system and auto dialer output contacts. The water shut off controller is AC wtih a battery back up. With a full port motorized stainless steels ball valve, the FloodStop uses a brass valve assembly lined with Teflon for long wear. The water leak sensor (included) is double sided.
Reset and Test Buttons: Test valve performance without water.
Controller: 20VAC and/or battery backup (4 C batteries)..
Simplicity: Easily installed, operated and maintained.
Multiple Applications: Residential, condo and apartment dwellings.
Operation: Full port ball valve automatically shuts off water supply to water heater when water sensor/sensors get wet.
Single Water Appliance Application: No wires to route throughout the home
Loud 85 decibel Alarm: Beeps. Mute button.
One Water Sensor Included: 1.5" X 7.5", double sided. Add optional sensors in series.
Warranty: 1 year limited manufacturer warranty
FloodStop Controller:
3 buttons: Mute, Close Valve and Open Valve.
Water sensitivity adjustment. Clockwise: less sensitive. Counter clockwise: More sensitive.
4-pin connection to valve/sensor connector.
Outputs: Normally closed. Contacts for any device that can utilize them, like auto phone dialers, alarm systems, X10 home automations devices.
Installation: Connect valve to the cold water line to the water heater. Mount the control unit. Place sensor(s) on floor. Plug power supply into an unswitched outlet. Note: electricity is used only when the sensor detects water.
NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. If no water is present and alarm sounds, place paper towel or cloth under sensor to "insulate" against floor dampness or metal of pan. When the paper or cloth gets wet, the sensor activates the shut-off and sounds the alarm.
How FloodStop (FS 3/4-C) Works:
The FloodStop valve installs between the water heater and its manual shutoff valve.
Water/leak sensor placement is at the water heater base.
Valve is open until water leak is detected
Water on the sensor signals the Floodstop controller which closes the valve and alarms.
Valve remains closed until system is reset and sensor is dry.
FloodStop (FS 3/4-C) Components:
Motorized full-port stainless steel ball valve in brass valve body lined with Teflon (3/4 inch compression fittings).
Control unit with battery backup (4 C batteries, not included).
AC power adaptor (or use 4 C Batteries as primary power source).
Water leak sensor.
Output contact wires (2).
Automatic Water Valve Shut Off Technical Specifications:
UL Listed Class 2 Wall Adaptor, 115AC/9VDC.
UPC listed, full port, motorized ball valve: CNC machined.
Controller Extension Wire for FloodStopWater Alarm and Automatic Water Valve Shut-Off Controllers Use this Flood Stop controller extension wire to install a FloodStop controller unit up to 11.5 feet...
3/8 Inch Automatic Water Shut-Off & Alarm Prevent significant water damage from dishwasher water line breaks, toilets and icemakers that use 3/8 inch water lines.
Transformer Extension Wire for FloodStop Water Alarm and Automatic Water Valve Shut-Off Devices. Reach an Electrical Outlet to Power the New Generation FloodStop Water Shut-Off Devices.
HTML
PDF