Floodchek washing machine inlet hoses MADE IN USA prevent flooding, water damage and high insurance rates in condos, homes, apartments or businesses where clothes washers are used. These 7 feet long washer hosescan outlast the washing machine itself. F lood Chek hoses are priced for total property retrofit, guaranteed for 20 years and are not available in stores. Best used with brass gooseneck swivel connections for better, easier installation. Measure. If you have 5 to 6 inches of free space, you may not need brass connectors.
This pair of 7 feet long Flood Check hoses is often used with stacked washer/dryer combinations. Inspect washing machine hoses several times a month. Look for bulges in the washer hose, especially the hot water intake hose. Or replace your washer hoses with Floodcheck replacement clothes washer hoses, the finest quality washer hoses made. The Floodchek washing machine hoses, made in the USA, help prevent costly water damage in homes, apartments, condominiums.
Each washing machine hose is tested to 1700 psi. The warranty: 20 years or the life of the washing machine, whichever comes first. Insurance estimates: broken washer pressure hoses annually cause over 100 million dollars in damages plus unreported losses, lost time and lost productivity.
Why Are Flood Chek Washing Machine Hoses Superior to Standard or Steel Covered Hoses ? About 70 pounds of water pressure constantly stresses washing machine hoses. FloodChek hoses can handle this stress. Instead of a single rubber tube or a rubber tube covered with flexible metal, our Flood Check hoses have these 5 layers:
traditional rubber tube
1st layer of 23# braided rayon reinforcement
2nd layer of 23# braided rayon reinforcement
a .012"-gauge rubber jacket and
a .063"-gauge rubber cover.
Why are Flood Check Washer Hose Couplings Superior? Our couplings are non-corroding solid brass couplings. Both ends are 3/4" female hose thread. These heavy duty couplings eliminate most drips or floods, which start at the couplings.
Flood Check Washer Hose Features:
Simple to Install: Shut off hot and cold water valves. Install red hose for hot water hose and blue hose for cold water. Hand tighten. Then use pliers to tighten nut 1/4 to 1/2 turn. Do not over tighten . (If you over-tighten, you may tear, distort or pop the gasket seal, especially on the shut-off side. In that case, the coupling will leak. Remove, replace the gasket, and reinstall.)
Floodchek Logo goes on washer or shutoff side.
Extended Length Washing Machine Hoses: 7 ft . (5 ft. is standard size.)
Tested to 1700 psi.
Matches flow specifications of all major washing machine manufacturers.
Both ends have a 3/4" Female hose thread.
Interior Hose Diameter: 1/2 inch. (Standard is 3/8 inch.)
Avoid water damage and flooding inconvenience from washer hose breaks.
Not Sold in Stores. Available On-Line. Made in USA.
Note: Hoses no longer have a filter as shown in picture. Filters quickly decompose due to minerals in water.
