Prevent Washer Hose Water Damage with FloodChek Washing Machines Hoses
Every condominium, home or apartment with a washing machin e on site is a flood waiting to happen. MADE IN USA Floodchek washer hoses are designed and engineered to prevent flooding because of heavy duty construction and heavy duty brass connections. These flood checkinlet hoses can outlast the washing machine itself and save thousands of dollars in water damage , the headaches of repairs from flooding, and the increased insurance costs you'll face.
Inspect washing machine hoses several times each month for bulges or minor water leaks. Or stop worrying and install Floodchek replacement clothes washer hoses with the 20 year warranty or the life of your washing machine. Protect your basement, your laundry room or the condo or apartment downstairs. Buy a pair of 5 feet long Floodchek water intake hoses, one blue and one red.
These are the finest quality washer hoses made. Each Floodchek washing machine hose is tested to 1700 psi. The warranty: 20 years or the life of the washing machine, whichever comes first. Insurance estimates: broken washer pressure hoses annually cause over 100 million dollars in damages plus unreported losses, lost time and lost productivity.
Why Are Flood Check Washing Machine Hoses Superior to Standard or Steel Covered Hoses ? About 70 pounds of water pressure constantly stresses washing machine hoses. Flood Check hoses can handle this stress. Instead of a single rubber tube or a rubber tube covered with flexible metal, our Flood Check hoses have these 5 layers:
traditional rubber tube
1st layer of 23# braided rayon reinforcement
2nd layer of 23# braided rayon reinforcement
a .012"-gauge rubber jacket and
a .063"-gauge rubber cover.
Why are Flood Check Washer Hose Couplings Superior? Our couplings are non-corroding solid brass couplings. Both ends are 3/4" female hose thread. These heavy duty couplings eliminate most drips or floods, which start at the couplings.
Flood Check Washer Hose Features:
Simple to Install: Shut off hot and cold water valves. Install red hose for hot water hose and blue hose for cold water. Hand tighten. Then use pliers to tighten nut 1/4 to 1/2 turn. Do not over tighten. (If you over-tighten, you may tear, distort or pop the gasket seal, especially on the shut-off side. In that case, the coupling will leak. Remove, replace the gasket, and reinstall.)
Floodchek Logo goes on washer or shutoff side.
Standard Washing Machine Hoses: 5 ft.
Tested to 1700 psi.
Matches flow specifications of all major washing machine manufacturers.
Both ends have a 3/4" Female hose thread.
Avoid water damage and flooding inconvenience from washer hose breaks.
Not Sold in Stores. Available On-Line.
Note: Hoses no longer have a filter as shown in picture. Filters quickly decompose due to minerals in water.