CatStop Auto Outdoor Cat Repellent by Contech. Automatic Outdoor Cat Deterrent. Easily and safely keeps cats out of your garden and flower beds. Uses one 9v battery. Covers approximately 280 sq. ft.
The Cat Stop must face the area you want to protect. A cat that enters the area sets off the built-in motion sensor. The
ultrasonic alarm range is from 21-25 kHz. Humans hear sounds between 2 kHz and
20 kHz so this rarely disturbs people. Note: Most dogs hear at
frequencies between 40 kHz to 100kHz.
One standard 9 volt battery operates the Cat Stop for
about nine months on one standard 9 volt battery. The Battery life estimate
is based upon 4900 activations over 245 days at an average of 20 per
day using an alkaline battery.
The CatStop protects about 330 square feet (20 feet or 6m
in front of the unit in an 80 degree arc). There are no controls or
adjustments. Install the battery. Position it. Turn it on.
The CatStop is an effective cat deterrent because:
A powerful burst of ultrasonic sound startles the cat.
The cat equates the location with the unpleasant sound.
The cat avoids the location in the future.
Unlike many pest deterrents that operate continuously, the
CatStop unit waits for the animal to come into range before activating.
This creates a greater startle effect.
CatStop Highlights:
Ultra sound based concept: Safe, effective cat pest control without chemicals, visually objectionable barriers or shock.
Infrared detection range: 80 degrees across a 20 ft distance in front of the device.
Passive ultrasonic detector: Operates unattended. Activates when movement is detected.
Operates 24/7: CatStop protects day and night for up to 6 months (or 4900+ activations) on one 9 volt battery.
Silently creates a temporary sound 'barrier': Works
where fences are not allowed or are impractical. Keeps neighborhood cats
from violating your space without drawing attention to your efforts.
Simple Installation: Easily extend coverage with additional CatStops.
Power supply: 9V battery (not included).
Output: 124 dB.
Sensor warm up time = 40-60 seconds when battery is first
inserted.When you activate the unit, the red light will come on for 3
seconds, and then turn off. It takes approximately 8 seconds for it to
re-charge between activation
