Hands-Free Toilet Hygiene with Swash 1000 Toilet Seat
Wash wands with temperature controlled warm water and warm air drying make the Swash 1000 elongated, white S1000-EW toilet seat with bidet features a great addition to any bathroom. No need to replace your toilet: add a Swash 1000 toilet seat from Brondell. The Swash 1000-RB can be installed on most toilets.
Check the measurement and shape of your existing toilet fixture and
compare it to the Swash 1000 Toilet Seat using the Fit Diagram. After
fit is verified, install the Swash 1000. Note: Measure carefully. Due to hygienic reasons, this toilet seat is returnable only for replacement in the event of a defect.
Swash 1000 Toilet Seat Bidet Installation:
Shut off water to the toilet
Remove your existing toilet seat
Install the Swash mounting bracket.
Attach the Swash to the bracket and connections with screwdriver and wrench (see directions for specific sizes.)
Mounting the toilet seat
Plumb
into the water source. Use a flexible water line (not included) to
install the T-valve (included in the product kit) directly below the
toilet tank.
Plug the Swash 1000's 3.5 feet long electrical cord
into a three prong GFI grounded outlet with an internal safety breaker.
If required, add a grounded extension cord to reach the standard 120VAC
GFI outlet.
The Brondell Swash
1000 toilet seat is made of germ-resistant plastic: clean with a soft
wet cloth and mild detergent. As necessary, use the quick release
feature to remove the entire seat from the mounting bracket for a more
thorough cleaning. The Swash wands are self-cleaning. However, Brondell
recommends the wands be cleaned monthly using a soft brush. Regularly
clean the removable mesh filter.
Swash
1000's warm water helps not only to clean one's private areas but also
helps relieve hemorrhoids Any age person can use this product as long
as they weigh 330 pounds or less. For elderly or incontinent persons,
the Swash 1000 helps wash away odors as well. UL listed. Limited 3 year
warranty.
PDF
