|
|
|
|
|
|
|
|
|
|
|
|
Ergosysftnet)
8 Day Autopetfeeder
|
|
|
|
|
|
|
|
|
|
|
|
|
Model and serial number may be found at the rear of the 8 Day Feeder base.
Please record both model and serial number in a safe place for future use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Where Purchased Date purchased
Model No. Serial #
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Owner’s Manual contains information for all models.
Read and keep this manual for future reference.
This manual contains important information on Safety, Assembly, Operation and Maintenance.
|
|
|
|
|
|
|
|
Ergo Systems Inc. Rev # : 1.1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Important: This is an Owner’s Manual for 8 Day Autopetfeeder. Please do not discard this.
|
|
|
|
|
|
|
|
Congratulations on purchasing the “8 DAY AUTOPETFEEDER“ . You will now have more time on your hands and your pet can be fed on time. Before you can use this appliance you need to follow some simple steps to assemble the 8 Day Autopetfeeder.
|
Before you call us, please have the following information ready.
1. Details of purchase like invoice number (found on the bill or invoice)
2. Name and model number of the product (found on the manual and on the carton.)
3. Actual problem after following the instructions.
4. List of missing parts.
|
|
|
|
|
|
|
|
|
|
DO NOT RETURN THE PRODUCT TO THE STORE
Call 1-888 ERGOSYS (1-888-374-6797)
If there are missing parts. Check all packing for missing
parts prior to discarding the package.
|
|
|
|
|
|
|
|
LIMITED WARRANTY
Please read this warranty carefully. Ergo Systems Inc. will warranty this product to be free from manufacturing defects, including workmanship, when assembled and operated according to operating instructions enclosed with this product, for a period of ninety (90) days from the date of original purchase. This warranty is non-transferable and applies solely to the original purchaser and does not extend to subsequent owners of this product. Please register your product at http://www.autopetfeeder.com .
1. Repair service for a period of ninety (90) days from the date of original purchase at no charge for parts and labor with proof of purchase.
2. Replacement of defective parts for a period of 12 months from the date of original purchase with proof of purchase. (Labor not included after initial ninety (90) days.)
3. This warranty does not cover cost incurred in the shipping of the product to and from Ergo Systems Inc. for service. Shipping to Ergo Systems Inc. must be prepaid and insured by UPS or other parcel delivery services.
THIS WARRANTY IS VOID IF THE PRODUCT IS:
1. Damaged due to negligence, abuse, misuse, accident, modification, tampering, alteration, faulty installation and / or acts of God.
2. Used for commercial applications or rentals.
3. Modified or repaired by anyone other than Ergo Systems Inc.
The extent of Ergo Systems Inc. under this limited warranty is the repair or replacement of the product at the sole discretion of Ergo Systems Inc. In no event shall Ergo Systems Inc.’s liability exceed the purchase price paid by the purchaser. Under no circumstances shall Ergo Systems Inc. be liable for any loss, direct, indirect, incidental, foreseen, unforeseen, special or consequential damage arising k out of or in connection with the use of this product. This warranty is valid only in the United States of America and Canada.
|
|
|
|
|
|
|
|
Reviewing these important safety alert symbols
When you see this Safety Symbol on the following pages, it will alert you to the possibility of damage to your 8 Day Pet Feeder, if you do not comply with the corresponding instructions. The hazard may come from something mechanical or electrical. Read the instructions carefully.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
List of parts in the 8 Day Autopetfeeder Box
|
Components
1. Base.
2. Bowl Cover.
3. Bowl.
4. Ice Pack
5. Digital timer
6. Bowl Cover Handle
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 8-Day Autopetfeeder comes as a pre-assembled unit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Now the digital timer needs to be programmed for the unit to work automatically. Follow the steps below to program the timer.
|
|
|
|
|
|
|
|
Bowl Cover Alignment
□ Check to see if the bowl cover aligns with the feed bowl. If the alignment is correct go to Step 3. If the alignment is off proceed to Step 1 .
|
|
|
|
|
|
|
|
Step 1
□ Remove the sticker from the Bowl Cover Handle.
|
Step 2
□ Remove the three screws to remove the Bowl Cover Handle. Align the bowl to the cover and tighten the screws. Replace the sticker.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installing batteries in the Timer Module.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
□ Remove the Digital Timer from the base by rotating it in anticlockwise direction.
|
Q You will find the Battery compartment at the back of the Timer Module.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig 5
Step 4
□ Install 3 new AAA batteries in the battery compartment.
|
|
|
|
□ Open the battery compartment by pushing the plastic tab to the left and lift up.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Step 5
□ Close and latch the cover.
|
|
|
|
|
|
|
|
|
|
|
|
|
Always install new batteries. When you replace the old battery you must do it within 1 minute or you will loose the programs.
|
|
|
|
THE TIMER WILL MAKE A BEEPING SOUND WHEN THE BATTERY IS LOW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the Digital Timer unit for 8 Day Autopet Feeder. The timer works on 3 AA batteries. With this Digital Controller Module you can record your voice which will be played back every meal time. Records your voice up to 7 Seconds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remove bowl cover to program the timer.
Press RESET button prior to programming the timer. Use 3 AA Batteries. Do not mix old and new batteries.
|
|
|
|
|
|
|
|
1.0 Setting the time mode : 24 hour (military time) or 12 hour AM/PM MODE
|
|
|
|
|
|
|
|
|
□ Press the HOUR and MINUTE button simultaneously to activate 12 hour or 24 hour program mode. The display will begin to flash.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
□ Press the PROGRAM button to switch from the present mode to the next mode i,e. from 24 hour to AM/PM or AM/PM to 24 hour mode.
|
|
|
|
|
|
|
|
|
|
|
|
1.1 Setting the Current Time
|
|
|
|
|
|
|
|
|
□ Press the HOUR and MINUTE button simultaneously to activate the setting mode.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press the HOUR button to set the HOUR .
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press the MINUTE button to set the MINUTE .
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press ON/AUTO/OFF button to go back to clock mode.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: The seconds setting cannot be altered.
|
|
|
|
|
|
|
|
1.2 Understanding the Timer
J The autopetfeeder is capable of feeding your pet up to 8 times per day. You can set the time for the feeder up to 8 times per day. This will give you control over the amount of food you feed your pet and also the time your pet is fed. By pressing the PROGRAM button you will enter the programming mode. The display will now show 1. At this time the feeder will turn ON and after the cover rotates 45 degrees, the feeder will turn off.
J The pet feeder is capable of feeding both dry and canned food and pet meds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Now let us understand the different modes of operation in the timer.
|
|
|
|
|
|
|
|
|
Press ON/AUTO/OFF button to toggle between TEST , AUTO and OFF mode. The display will show the mode in which the timer is set
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
□ In TEST mode the bowl cover rotates 45 degree and enters the next feed compartment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
□ In AUTO mode the feeder works as per the programmed schedule.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
In OFF mode the feeder does not work.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.4 Setting the Program Mode
|
|
|
|
|
|
|
|
|
□ Press the PROGRAM button to enter into program mode. The display will show 1 which means that we are setting the 1st schedule.
|
|
|
|
|
|
|
|
Fig 11
1.5 Timer Programming Examples:-
□ Let us set a schedule for 7.10 am.
|
|
|
|
|
|
|
|
|
Press the HOUR button till the display shows 7 AM
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press the MINUTE button till the display shows 10.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
□ Press the PROGRAM button again and the display will show 2 which means that we are setting the second feed time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
