|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ONE YEAR LIMITED WARRANTY
|
|
|
|
|
|
Mail this part of the warranty: (fill out information, make copy and send)
|
|
|
|
|
Yo ur manufacturer’s limited warranty is now effective. Please mail this card to Koolatron. Date: Item#:
|
|
|
|
Purchased from: ❑ Retail Store
Retailer’s Name:
Address:
|
|
|
|
|
|
|
|
|
|
Your Name: Address: City: Zip:
|
|
|
|
|
|
|
|
|
|
|
Mail this portion of the card to:
IN U.S.A. - Koolatron, 1101 N. Keller Road • Suite F • Orlando, FL 32810 IN Canada - Koolatron, 27 Catharine Avenue • Brantford, Ontario N3T 1X5
✁
|
|
|
|
|
SAVE THIS PART OF THE LIMITED WARRANTY
|
|
|
|
|
Please return the top portion of this warranty card to Koolatron, while retaining this portion for your records.
1. Koolatron warrants this product to be free of manufacturing defects. Should any such defect develop or become evident within ONE year from the date of purchase, Koolatron will replace the entire product or, at its option,repair or replace the defective part(s) without charge.
2. To return: Securely pack the entire unit. Be sure carton clearly identifies sender by name and address. Attach a letter or card, describing defect, and original sales receipt. Mail prepaid to the address shown below:
CN Customers - Koolatron, 27 Catharine Avenue • Brantford, Ontario N3T 1X5 US Customers - Koolatron, 4330 Commerce Drive • Batavia, NY 14021 If you have any questions, or would like to learn more about Koolatron, please contact 800-265-8456 .
|
|
|
|
This warranty is void if damage or malfunction is due to abuse or failure to operate product in accordance with instructions and on recommended electrical current.
|
|
|
|
For your records:
Date: Item#:
|
|
|
|
|
|
|
Customer Service Phone: 800-265-8456
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GENERAL SAFETY INFORMATION
|
|
|
|
|
|
|
|
|
This manual contains important information about the operation and maintenance of the Koolatron Super Bark Free. General safety information is presented here and is also located throughout this manual. Keep this manual for future reference and to educate any new users. The symbols shown below are used throughout this manual for your safety and should always be heeded.
|
|
|
|
|
SENSITIVITY ADJUSTOR
BATTERY INDICATOR
POWER INDICATOR TEST BUTTON
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DANGER indicates an immediately hazardous situation which, if not avoided, will result in death or serious injury.
|
LED DISPLAY
MODE BUTTON
RESET BUTTON UP BUTTON
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
|
|
|
|
|
|
|
|
|
|
|
SOUND SELECTOR
• ULTRASONIC
• AUDIBLE
|
|
|
|
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate personal injury or property damage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BATTERIES:
The Super Bark Free uses four (4) "D" size alkaline batteries (not included) or 50ft. power supply adapter (included). Batteries last approximately 2000 sound releases under normal conditions.
To Install Batteries
|
The placement of the Bark Free is important because ultrasonic sound patterns do not penetrate solid materials. The ultrasonic sound is deflected or absorbed within the environment. Hard surfaces such as concrete, wood, metal, plastic, and window glass will deflect the sound. Soft surfaces such as grass, plants, or bedding can absorb the sound. The unit should be placed with no obstructions between the Super Bark Free and the dog(s). Think "open line of sight".
MOUNTING THE UNIT
The Super Bark Free is weather resistant and splash proof (except the Remote Control and AC Adaptor).
1. The best place to position the Super Bark Free is slightly above and facing the dog. Super Bark Free can detect dog’s barking up to a range of 20 feet. Make sure your dogs cannot reach the unit to prevent damage. Keep extension cord out of reach. Super Bark Free can be mounted or placed freestanding by extending the metal stand at the back of the unit.
2. Super Bark Free may be triggered by loud sounds other than barking, do not mount it in noisy or high wind areas. Beware exposing the unit to water, it may temporarily reduce the sensitivity of the microphone and speakers.
NOTE:
The operation temperature of Super Bark Free is -10˚C to 50˚C. To prevent malfunction, do not place the unit near any heat source.
|
|
|
|
|
|
|
|
|
1. Turn knob on battery cover counter clockwise.
|
|
|
|
3. Insert 4 "D" batteries in the correct orientation.
|
|
|
|
|
4. Replace knob and turn clockwise.
|
|
|
|
NOTE:
When the Red LED Power Indicator is flashing, the unit is low in power.
|
|
|
|
|
There is also an input jack for the power adapter. It is located on the back on the left side of the unit, protected by a plastic plug. AC adapter specifications: 200 mA/DC 6/V (not included). Please contact your local dealer or purchase directly from Koolatron by calling 407.857.8786, toll free at 888.353.6835 or Koolatron onthewebatwww.koolatron.com .
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TESTING THE DEVICE
1. Use batteries or AC adaptor to power Super Bark Free.
2. Press the ON/OFF button on the Remote Control (optional) and see if the main unit can be switched ON/OFF.
NOTE:
• The effective range of the Remote Control is 30 feet.
• Either Remote Control or Timer setting can turn ON/OFF the unit.
3. Press the Test Button, it will lower the ultrasonic frequencies to an audible human level and let you hear if the unit is working or not.
NOTE:
• To avoid hearing damage, do not use the Test Button for
long periods of time and do not allow children to play with the Test Button.
• Test Button can be used although the main unit is off.
SETTING “ULTRASONIC” / “AUDIBLE”
1. Make sure the “Ultrasonic” sound is set after you have tested the unit.
2. Use only “Audible” setting when testing (prolonged use of “Audible” sound setting may cause noise and create disturbance to others).
NOTE:
The output frequency of Ultrasonic Sound is 19KHz - 23KHz and the Audio Sound is 8KHz +/- 3KHz, over 120dB.
|
|
|
|
|
ADJUSTING THE SENSITIVITY
1. Set the sound selector to “Audible”. This will lower the tone frequency and you can hear the tone.
2. Place the unit away from you and listen. If you do not hear the tone each time you hear barking, adjust to a high sensitivity level, or place the unit closer to the dog. If you hear the tone without hearing the barking, adjust to a lower sensitivity level.
3. When you have adjusted the sensitivity level, reset the Sound Selector to “Ultrasonic”.
NOTE:
• Ensure that background noise level is not too high or it will cause continuous triggering. You can correct this by lowering the sensitivity level.
• Try to use the lowest possible sensitivity setting that will respond consistently to barking. If it is set too high, other sounds may trigger the unit. The “Novel Stimulus” aspect of the tone will be lost and your dogs will learn to ignore the Super Bark Free.
• Do not try to instigate barking from your dog to find out if Super Bark Free will stop them from barking. A dog will always bark if harassed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SETTING THE TIMER
Just set the Timer once and the preset
ON/OFF time will be repeated daily.
When the pre-set time arrives, the unit
will turn ON/OFF automatically. It can
be shown on the Green LED power indicator. Repeat the
following steps to set the Current Time > Timer “ON” Time
> Timer “OFF” Time respectively.
1. Press and hold MODE key to enter setting mode.
2. You need to set up the current time first. At the timer setting mode, the hour digits will start flashing.
3. Press UP key to adjust the hour value and press MODE to confirm.
|
NOTE:
In Timer ON/OFF setting, you will see a “ON/OFF” signal shown at the top/bottom right corner of the LCD display.
|
|
|
|
9. When the timer ON/OFF time arrives, the main unit will be turned ON/OFF automatically and the Green Power Indicator will light ON/OFF. A “clock”
|
|
|
|
|
|
|
|
|
|
sign will also be shown at the left of the LCD display indicating whether the timer is “ON” or “OFF”.
10. Use the Reset Button to reset all the time setting values, including the current and timer ON/OFF Time.
NOTE:
• The hour setting is a 12-hour format (US version) or 24hour format (Europe version), the “AM” or “PM” icon will be displayed at the Top/Bottom left corner of the LCD for indication.
• Pressing and holding the UP Key will cause digits to advance rapidly.
• Simply press the MODE Key to check ON/OFF time when it is not in the Timer-Setting Mode.
|
|
|
|
4. After confirming the hour value, the minute digits will start flashing. Press UP key to adjust the minute value and press MODE to confirm.
|
|
|
|
5. After confirming the current time setting, it will automatically switch to Timer On setting.
|
|
|
|
|
|
|
|
|
6. Repeat step 3 and 4 to set the desired Timer “ON” setting.
|
|
|
|
|
|
|
|
7. After confirming the Timer “ON” setting, it will automat ically switch to Timer “OFF” setting.
|
|
|
|
|
|
|
|
|
8. Repeat step 3 and4 to set the desired Timer “OFF” setting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ACTIVATION MICROPHONE AND LEDS:
The activation microphone is located on the face of the Super Bark Free under the Test Button. See Illustration. The activation microphone should be kept free of obstruction or dirt. The activation microphone in the Super Bark Free just detects sound, it can not tell the difference between different types of sounds.
|
WHAT RESULTS TO EXPECT:
Properly setting the "Sensitivity" switch to activate the unit only when your dog barks helps maintain the "Novel Stimulus" aspect of the Super Bark Free. Dogs learn to associate the loud, irritating sound produced by the unit as being a result of barking, and stop barking to stop the Super Bark Free sound. Always remember, the activation microphone in the Super Bark Free just detects sound, it can not tell the difference between different types of sounds.
Do not try to instigate barking from your dog to see if the Super Bark Free is working. A DOG WILL ALWAYS BARK IF HARASSED.
Most dogs find that being close to an activated Super Bark Free is very distressing and uncomfortable. Sometimes older dogs or breeds with congenital hearing problems are unable to hear the ultrasonic sounds emitted and ignore the Super Bark Free. This is also true of situations where there is a lot of other noise close to the dogs. The ultrasonic sound emitted is drowned out by the other noise.
There are no 100% perfect cures that stop 100% of the barking, this includes the Super Bark Free. Within a week or two, if you haven’t noticed a significant reduction in the overall amount of barking, especially at night, then you may have a more serious problem than just simple unnecessary nuisance and boredom barking. Some of the more severe problems include:
Protective Barking - They may bark at trespassers or neighbors that tease or threaten them. This may include people knocking on your door or people walking through your yard.
Dogs Trained to Bark - They may inadvertently be trained to bark, by
receiving attention (both positive and negative) for barking.
Feeding Time and Work Time Barking - We recommend that you disconnect Bark Free when feeding. When walking one dog and leaving others behind, get out of sight as soon as possible.
Hearing Problems - Deaf dogs will not react to the Super Bark Free. Dogs with high frequency hearing damage may react to the audible setting. However you and your neighbors may hear it.
High Stress Environments - Bark Free is not recommended for boarding kennels, animal shelters and grooming salons. These locations generate protective and fear barking.
• 10 •
|
|
|
|
|
|
|
|
The bottom LED is green and lights to indicate that the unit has power. The top LED is red and lights when the unit is using battery power.
IMPORTANT NOTE: Before using your new Super Bark Free, you must set the clock and timer first. When the preset time arrives, the Super Bark Free will turn on automatically with the Green LED power indicator illuminated indicating your Super Bark Free is operating correctly.
• 9 •
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1. !CAUTION: The Super Bark Free is for OUTDOOR USE ONLY. Power supply must be kept dry.
2. !CAUTION: Do not place your ears close to the unit speakers or use in confined spaces as hearing damage may result.
3. !CAUTION: Not for use by children.
4. When using the power supply, use only extension cords having plugs and receptacles that accept the Super Bark Free plug.
5. Use only extension cords that are UL approved. Replace or repair damaged extension cords.
6. Don’t abuse the power supply cord. Never yank it to disconnect from the receptacle or from the Super Bark Free. Keep all electrical cords away from heat, oil, and sharp edges.
7. !WARNING: The connection between the Super Bark Free and any extension cord used must be kept dry and off of the ground.
8. Do not insert foreign objects into this or any electrical product.
9. !WARNING: Do not immerse this unit in water or any other liquid. Unplug before cleaning.
10. Do not use harsh solvents on any part of this product.
11. All repairs to the Super Bark Free must be performed only by qualified service personnel.
12. Read and follow all instructions prior to use of the Super Bark Free.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Effective range up to 20 ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
